LED Indicators, Name Description | Multi-Tech Systems specs

Chapter 1 – Product Description & Specifications

Category	Description
Software Features	Functional Features
(continued)	Command Line Configuration over Serial or Ethernet
	Serial – TTY
	Ethernet – Telnet – Web
	Username and Password Authentication Using Local Database
	The Username and Password can be created using commands.
	The User database authenticates the Users before access to command mode
	of the MultiConnect Adapter is enabled.
	Remote Transparent Bridging
	Ethernet-to-Serial Bridging
	Point-to-Point Protocol (PPP)
	Negotiations Bridging Control Protocol
	802.3 MAC Type
	CCP Compression
	Discovery Support and IP Module Port Capture Using WinMCSI Port
	Redirector
	The Serial-to-Ethernet Adapter can be discovered by new WinMCSI Port
	Redirector software on windows and the serial status can be viewed using
	WinMCSI Client.
	The Serial-to-Ethernet Adapter's serial port can be captured using any terminal
	application after creating and mapping a virtual port.

LED Indicators

Name	Description
LNK	Link – Lit when data connection has been established.
ACT	Activity – Lit when data is being transmitted or received.
SPD	Speed – Lit when the speed is 100 Mbps. Off for 10 Mbps.
STS	Status – Blinks to indicate that the unit is functioning.
PWR	Power – Lit when the Adapter is turned on.

Multi-Tech Systems, Inc. MultiConnect Serial-to-Ethernet Adapter User Guide (S000344D)