Operating Your Wave® Radio/CD
Setting the alarms
Note: You can set alarms with the Wave Radio/CD on or off.
Function | ControlWavepanel |
| Radio/CD |
To enter alarm setup mode - Press and release Alarm Setup. The system is now in alarm setup mode. ALARM 1 flashes for 10 seconds.
Alarm Setup
To select which alarm to set - While ALARM 1 is flashing, set alarm time, volume, and alarm sound (tone 
, radio, or CD), for Alarm 1. Press Alarm Setup again until ALARM 2 is flashing. While it flashes for 10 seconds, begin to set Alarm 2.
Alarm Setup
To set the alarm time - While the selected alarm is flashing, press the Time | or to set the | Time |
|
| Time |
|
|
| |
alarm time. The selected alarm flashes for 10 seconds. |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| ||
To set the alarm source - While the selected alarm is flashing, press FM, AM, or CD to select |
|
|
|
|
|
|
| ||
and display that source. The tone is no longer selected. |
| FM | AM | CD Play | |||||
• To reset to tone, press the source currently selected (FM, AM, or CD), which deselects it. |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| |||
• When no source is displayed, the alarm is set to tone . |
| Track/Tune |
|
|
| ||||
• Setting FM or AM alarm, the station last used for this alarm is shown. Or, use Presets or |
|
|
|
|
|
|
| ||
Track⁄Tune or to select a station. |
|
|
|
|
|
|
|
|
|
• Setting CD alarm, track 1 is shown. Or, use Track⁄Tune or to select a specific track or time | CD Mode |
|
|
| |||||
location for the alarm. Press CD Mode | to select RANDOM or TRACK REPEAT. The CD |
|
|
| |||||
|
|
|
|
|
|
| |||
plays, repeating as needed, until the alarm shuts off. | CD Stop ■. |
|
|
|
|
|
|
| |
• To set radio or CD followed by tone | , select radio or CD alarm, then press |
| CD Stop |
|
|
| |||
AUX is not available as an alarm source. |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| ||
To set the alarm volume - While the selected alarm is flashing, press Volume ▲ or ▼ to set |
|
|
|
|
|
|
| ||
the alarm volume, from 10 to 99. The selected alarm flashes for 10 seconds. |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| ||
To test the alarm volume - While the selected alarm is flashing, hold down Alarm Setup and | Alarm |
|
|
|
|
|
| ||
press Volume ▲ or ▼ to hear the volume setting, as demonstrated by the tone | alarm only. |
|
|
|
|
|
| ||
Setup |
|
|
|
|
|
| |||
To adjust snooze time - The system is set for a standard 
or 
to adjust the snooze time (from 1 to 30 minutes) for that alarm. The number of minutes and Sn appear on the display to confirm your selected snooze time. You can set a different snooze time for each alarm.
Sleep/Snooze
Time Time
To exit from alarm setup - To leave alarm setup mode, wait 10 seconds for it to disengage. Or you can press AUX once or Alarm Setup a few times until there is no ALARM 1 or ALARM 2 flashing.
Alarm
AUX Setup
To check the alarm setting - To display the alarm setting for 10 seconds, press and release Alarm Setup. Press again to display one alarm setup and repeat to display the other alarm setup.
Alarm Setup
Reading the alarm setup displays
Figure 13 | 1 |
|
|
| |||
| Alarm |
|
|
Examples of alarm setup |
| ||
Setup |
| ||
displays |
|
|
|
| ALARM 1 flashes. You can begin by setting the time. | ||
|
| ||
2
FM
3
Alarm
Setup
ALARM 2 flashes. You can begin by setting the time.
4
CD Play
Pressing FM selects it as the source for ALARM 1. | Pressing CD selects it as the source for ALARM 2. |
20