Programming the kitchen timer
You can save kitchen timer periods.
1.Press the button TIMER/ALARM MODE t.
2.Using the button TUNING UP/DOWN g programme in the desired time.
3.Press the button STORE f. In the display "T" blinks.
4.Press the button 1/3 PRESET, 2/4 PRESET o for the required save position. There are four save locations at your disposal. In the display the number of the selected save location appears.
5.Press the button STORE f once again. The time
period is now saved.
If a button is not pressed within ten seconds, the kitchen radio switches back to time display.
6.To recall the saved kitchen timer settings, press the button TIMER/ALARM MODE t and the button of the corresponding memory save location (1/3 PRESET, 2/4 PRESET o).
7.Press the button TIMER/ALARM MODE t once more to start the kitchen timer. A clock symbol running in an
8.To switch the kitchen timer off, hold the button
TIMER/ALARM MODE t pressed down.
Setting alarm times (Alarms 1 and 2)
You can programme two alarm times into your kitchen radio.
Alarm function | Symbol in the display |
Acoustic signal |
|
Radio |
|
Switched off | no symbol |
1.Press the button ALARM 1/VOL+ y (or ALARM 2/ VOL- i). The last set alarm time for A1 resp. A2 and, possibly, the symbol for the type of alarm (see table above) are shown on the display.
2.Press the button TUNING UP/DOWN g to set the desired alarm time.
3.Press the button ALARM 1/VOL+ y (or ALARM 2/ VOL- i) repeatedly until the desired alarm type (see table above) is shown in the display.
4.Press the button A.O.T. d to set the weekdays on which you require the alarm function: You can select between workdays (Mo, Tu, We, Th, Fr), weekends (Su, Sa), whole weeks (Su, Mo, Tu, We, Th, Fr, Sa) or the present weekday. The selected setting is shown on the display.
5.Press the button A.O.T. d repeatedly until the desired alarm days are programmed in. Keep the button A.O.T. d pressed down until a single day appears on the display.
6.Press the button A.O.T. d to set the required
weekday.
To return to the selection of workdays, weekends or whole weeks, once again hold the button A.O.T. d briefly pressed down.
7.Press the button MODE SET/BASS j to save the programming and to return to time display.
When the alarm signal sounds...
•and the alarm function "Radio" has been selected, the radio plays for one hour at a
•and the alarm function "Signaltones" has been selected, the signal tone sounds for 10 minutes. To finish it, press the button ALARM 1/VOL+ y or
ALARM 2/VOL- i.
- 7 -
