4.Mark the four points for the drillholes with a pencil.
5.Mark the drillhole with a mandril.
6.Firmly secure the mounting plate q with the supplied screws.
7.Hold the kitchen radio slanted, with the two recesses in the retaining lugs on the mounting plate q. Press the kitchen radio upwards until it audibly engages.
Secure the wire antenna with a piece of adhesive tape such that it does not hang down.
Setting up the kitchen radio
Do not set the kitchen radio up without the mounting plate q. Otherwise the speakers are covered and the sound is scarcely audible.
To set up the kitchen radio with the enclosed mounting plate q:
1.Simultaneously press the two retaining levers w on the back of the appliance down. Push the mounting plate q back and remove it.
2.Push the two retainer lugs on the mounting plate q into the recesses on the lower rear side of the kitchen radio.
3.Firmly press the front part of the mounting plate q down until you hear it engage. You can now
set up the radio.
To disassemble the mounting plate q, grip the mounting plate q from below with the thumbs and press it forwards and up until it disengages. You can now remove the mounting plate q.
Commissioning
Inserting the back-up batteries
The
1.Open the lid of the battery compartment a on the underside of the kitchen radio.
2.Insert the batteries. Make sure the polarities are correct.
3.Close the lid of the battery compartment a. The lid must audibly engage.
Note:
The
Providing mains power
•Insert the plug into a power socket. In the display, the time is indicated by "00:00.00".
To be able to use the alarm functions of the radio, first of all programme in the date and time, as described in the following section.
- 5 -
