JVC HX-D77 manual English, OPTICALDIGITAL OUTPUT Signals, Timer operations, USB Operations, Output

English

USB Operations:	Timer operations:
Unable to play back through the USB connection.	Daily Timer does not work.
] USB connection and setting is incorrect (see page 14).	] The System has been turned on when the on-time comes.
The sound through the USB connection stops.
	Timer starts working only when the System is turned off.

]Noise and static electricity may stop the sound through the USB connection. In this case, do the following operations:

•Disconnect and connect the USB cable again

•Restart the music software on your PC

•Turn off and on the system

If you still have a problem, reset the System.

While in standby...	Main Unit
	ONLY

Press and hold until the display flashes.

The factory default settings are restored and all the settings you have made are erased.

OPTICAL DIGITAL OUTPUT Signals

	DIGITAL AUDIO		Output Signals
	OUTPUT
Playback disc		STREAM/PCM	DOLBY DIGITAL/PCM		PCM ONLY
DVD VIDEO
	with 48 kHz, 16/20/24 bit		48 kHz, 16 bit Linear PCM*1
	Linear PCM
	with 96 kHz, Linear PCM		48 kHz, 16 bit Linear PCM
	with Dolby Digital	Dolby Digital bitstream			48 kHz, 16 bit Linear PCM
	with DTS Digital Surround	DTS bitstream		48 kHz, 16 bit Linear PCM
DVD-R/-RW in DVD-VR format
	with 48 kHz, 16/20/24 bit		48 kHz, 16 bit Linear PCM*
	Linear PCM
	with Dolby Digital	Dolby Digital bitstream			48 kHz, 16 bit Linear PCM
SVCD, VCD, CD		44.1 kHz, 16 bit Linear PCM/48 kHz, 16 bit Linear PCM
CD with DTS Digital Surround		DTS bitstream		44.1 kHz, 16 bit Linear PCM
MP3/WMA disc			No output

*While playing some DVDs, digital signals may be emitted at 20 bits or 24 bits (at their original bit rate) through the DIGITAL OUTPUT (OPTICAL) terminal if the discs are not copy-protected.

43