Select a preset number for the station you store.
Examples:
To select preset number 5,
press 5.
To select preset number
10, press10.
To select preset number 15, press h10, 1, then 5.
To select preset number 30, press h10, 3, then 0.
• You can also use ¢/4 on the remote control or the PRESET +/– control on the main unit.
2
(While holding...)
To tune in to a preset station
1 Select the band (FM or AM).
FM AM
Store the station.
3
Select a preset number for the station you store.
2
Tune in to a station you want to preset, then enter into the presetting mode.
(While holding...)
1
You can preset 30 FM and 15 AM stations.
To preset stations
Remote
ONLY
To save the power consumption while on standby—Eco mode
While on standby...
ECO
Canceled
Main Unit
ONLY
The display illumination (including the display demonstration) disappears.
Listening to the Radio
To select the band (FM/AM)
INFO
FM
AM 
To tune in to a station
While FM or AM is selected...
1sec.
Increases the frequency.
Decreases the frequency.
When a station (frequency) with sufficient signal strength is tuned in, the frequency search stops.
•When you repeatedly press the button, the frequency changes step by step.
To stop searching manually, press either button.
If the received FM station is hard to listen
Remote
ONLY
| The MONO indicator |
| lights on the display. |
| Reception will improve |
| though stereo effect is |
| |
(While holding...) | reception mode. |
To restore the stereo effect, press the button again (the MONO indicator disappears).
11
