To move to the next or previous page of the current menu:
Moves to the next page.
Moves to the previous page.
To return to the previous menu:
(While holding...)
To cancel PBC
You can also cancel PBC function by pressing the number button to select a track.
To reactivate PBC, press 7, then press 4.
Playing Back from the PC
This System is equipped with a USB terminal on the front panel. You can connect your PC to this terminal and enjoy sound reproduced through your PC.
When you connect your PC for the first time, follow the procedure below.
•Remember you cannot send any signal or data to your PC from this System.
IMPORTANT
•Always set volume to VOL MIN when connecting or disconnecting the other equipment.
DO NOT turn off the System and disconnect the USB cable while installing drivers and playing back, and for several seconds after your PC recognizes the System.
How to install the USB drivers
The following procedure is described using the English version of WindowsR XP. If your PC is running on a different version of Windows, the screens shown on your PC’s monitor will differ from the ones used in the following procedure.
1Turn on your PC and start running WindowsR 98SE, WindowsR Me, WindowsR 2000 or WindowsR XP.
•If the PC has been turned on, quit all the applications now running.
2Turn on the System.
3Select USB for the source.
Remote control: | Main unit: | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4Connect the unit to the PC using a USB cable (not supplied).
USB cable (not supplied)
(front panel) 
PC
•Use “USB series A plug to B plug” cable when connecting.
5The USB drivers are installed automatically.
•If the USB drivers are not installed automatically, install the USB drivers following the instructions on the PC’s monitor.
14
