Multi-Tech Systems MTCBA-E-U manual Safety

Page 6

Chapter 2 – Installation

Safety

General Safety

The modem is designed for and intended to be used in fixed and mobile applications. “Fixed” means that the device is physically secured at one location and is not able to be easily moved to another location. “Mobile” means that the device is designed to be used in other than fixed locations.

Caution: Maintain a separation distance of at least 20 cm (8 inches) is normally maintained between the transmitter’s antenna and the body of the user or nearby persons. The Modem is not designed for or intended to be used in portable applications within 20 cm. (8 inches) of the body of the user.

RF Interference Issues

It is important to follow any special regulations regarding the use of radio equipment due in particular to the possibility of radio frequency, RF, interference. Please follow the safety advice given below carefully.

•Switch OFF your Wireless MultiModem when in an aircraft. The use of cellular telephones in an aircraft may endanger the operation of the aircraft, disrupt the cellular network and is illegal. Failure to observe this instruction may lead to suspension or denial of cellular telephone services to the offender, or legal action or both.

•Switch OFF your Wireless MultiModem when around gasoline or diesel-fuel pumps and before filling your vehicle with fuel.

•Switch OFF your Wireless MultiModem in hospitals and any other place where medical equipment may be in use.

•Respect restrictions on the use of radio equipment in fuel depots, chemical plants or where blasting operations are in progress.

•There may be a hazard associated with the operation of your Wireless MultiModem close to inadequately protected personal medical devices such as hearing aids and pacemakers. Consult the manufacturers of the medical device to determine if it is adequately protected.

•Operation of your Wireless MultiModem close to other electronic equipment may also cause interference if the equipment is inadequately protected. Observe any warning signs and manufacturers’ recommendations.

Vehicle Safety

•Do not use your MultiModem while driving.

•Respect national regulations on the use of cellular telephones in vehicles. Road safety always comes first.

•If incorrectly installed in a vehicle, the operation of Wireless MultiModem telephone could interfere with the correct functioning of vehicle electronics. To avoid such problems, be sure that qualified personnel have performed the installation. Verification of the protection of vehicle electronics should be part of the installation.

•The use of an alert device to operate a vehicle’s lights or horn on public roads is not permitted.

Maintenance of Your Modem

Your Wireless MultiModem is the product of advanced engineering, design and craftsmanship and should be treated with care. The suggestions below will help you to enjoy this product for many years.

•Do not expose the Wireless MultiModem to any extreme environment where the temperature is above 50ºC or humidity is above 90% noncondensing.

•Do not attempt to disassemble the Wireless MultiModem. There are no user serviceable parts inside.

•Do not expose the Wireless MultiModem to water, rain, or spilled beverages. It is not waterproof.

•Do not place the Wireless MultiModem alongside computer discs, credit or travel cards, or other magnetic media. The phone may affect the information contained on discs or cards.

•The use of accessories not authorized by Multi-Tech or not compliant with Multi-Tech's accessory specifications may invalidate the warranty of the Wireless MultiModem.

•In the unlikely event of a fault in the Wireless MultiModem, contact Multi-Tech Tech Support.

Your Responsibility

This Wireless MultiModem is your responsibility. Please treat it with care respecting all local regulations. It is not a toy. Therefore, keep it in a safe place at all times and out of the reach of children.

Try to remember your Unlock and PIN codes. Become familiar with and use the security features to block unauthorized use and theft.

Multi-Tech Systems, Inc. MultiModem EDGE USB Wireless Modem User Guide

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents MultiModem Edge USB World Headquarters Revision History Date DescriptionTrademarks and Logos Technical Support Country By Email By PhoneContents Product Description Specifications FeaturesProduct Description Benefits/Features in Applications Application OverviewApplication Types Safety Package Contents General Specifications SpecificationsAntenna/RF Specifications Electrical CharacteristicsAT Command Reference Guides InterfacesLEDs Activation Installation Activate Your Wireless AccountInsert the SIM Card into the Holder Connect the Antenna and USB Cable Handset Connection OptionalAttach the Modem to a Flat Surface Optional Part a for Windows XP/2003 Installing the USB Driver Install the Modem DriverInstalling the Modem Driver in Windows XP/2003 IntroductionClick on Install from a list or specific location Advanced Click Continue AnywayCompleting the Found New Hardware Wizard screen appears Part C for Windows XP/2003 Installing the Modem INF File Installing the Modem Driver in Windows Part a for Windows 2000 Installing the USB DriverPage Part B for Windows 2000 Associating PC Port with USB Driver Part C for Windows 2000 Installing the Modem INF File Using Your Wireless Modem Phone Number for the Wireless ModemExamples of Useful AT Commands Answering a Circuit-Switched Data CSD Connection Establishing a Voice CallSend a message from storage. Type AT+CMSS=x press Enter Using Short Message Service SMSWrite a message to memory Read a stored messageShort Messages Examples Requirements Internet AccessConnecting to the GPRS/EDGE Network for Internet Access Modem Options windowDisconnecting the Connection Create Your Dial-Up Connection in Windows XPMobile PhoneTools Solutions for ‘no connection through serial link’ situation Troubleshooting Frequently Asked QuestionsTroubleshooting Examples Solutions for no carrier messageFrequently Asked Questions Wireless Modem Reference Information Reference InformationEtsi contact Appendix a Warranty and Repairs Multi-Tech Warranty StatementRepair Procedures for U.S. and Canadian Customers Replacement Parts Repair Procedures for International CustomersRepair Procedures for International Distributors Info@thesupplynet.comJuly

MTCBA-E-U specifications

Multi-Tech Systems, a pioneering leader in IoT devices, offers the MTCBA-E-U, a compact and powerful cellular modem designed for a variety of applications. Known for its flexibility and robust connectivity, the MTCBA-E-U is tailored for developers and businesses looking to integrate cellular connectivity into their projects. This versatile device supports multiple cellular standards, including LTE, making it suitable for a wide range of IoT solutions.

One of the standout features of the MTCBA-E-U is its ability to provide reliable data transmission over cellular networks. It supports global LTE bands, ensuring that the device can operate seamlessly across various regions. This makes it an ideal choice for organizations that require a consistent connection for remote monitoring, asset tracking, or machine-to-machine communication.

The MTCBA-E-U boasts a compact form factor, allowing for easy integration into existing systems without occupying excess space. This feature is particularly beneficial for applications where space is at a premium. Additionally, the device is equipped with multiple interfaces, including USB, UART, and GPIO, offering flexibility for different connection and communication needs.

Powered by an efficient processor, the MTCBA-E-U delivers fast data rates, ensuring that users receive timely information. Its low power consumption is another notable characteristic, allowing for longer operational times, which is crucial in battery-powered applications. This efficiency contributes to the overall sustainability of solution deployments, particularly in remote or hard-to-reach locations.

Security is a top priority for IoT devices, and the MTCBA-E-U does not disappoint. It incorporates advanced security protocols to protect data transmission. This includes features like secure boot and encryption, helping to safeguard sensitive information against potential cyber threats.

Multi-Tech Systems provides comprehensive support and resources for developers using the MTCBA-E-U. This includes a rich set of development tools and APIs, enabling users to rapidly prototype and deploy their applications. The company's commitment to customer support ensures that businesses can overcome challenges quickly and effectively.

In conclusion, the Multi-Tech Systems MTCBA-E-U is a versatile and reliable cellular modem that stands out in the IoT landscape. With its global LTE support, compact design, multiple interfaces, low power consumption, and robust security features, it is an excellent choice for any organization looking to leverage cellular connectivity in their IoT solutions.
Top Page Image Contents