Multi-Tech Systems MT2834BL, MT2834BA manual Password Command Summary, 25bis Commands

	Appendix C - AT Command Summary
Password Command Summary
Command	Description
#Ixxxxxxxxxx	Login Password is any keyboard characters (x)
	(upper/lower case sensitive), minimum 6 and
	maximum 10 characters. The default Login
	Password is #IMULTI-TECH.
#Syyyyyyyyyy	Setup Password is any keyboard characters (y)
	(upper/lower case sensitive), minimum 6 and
	maximum 10 characters. The default Setup
	Password is #SMODEMSETUP.

V.25bis Commands

Command	Description
$Vn	$V0 returns modem to AT command mode when in
	V.25bis mode.
	$V1 enables V.25bis mode of operation.
	$V2 allows modem to receive one V.25bis command
	while in AT command mode without leaving AT
	command mode.
	$V5 DSR follows DTR in V.25bis mode.
	$V6 DSR does not follow DTR in V.25bis mode.
CSPs	Changes the serial bps rate.
	CSP0300 - 300 bps
	CSP1200 - 1200 bps
	CSP2400 - 2400 bps
	CSP4800 - 4800 bps
	CSP9600 - 9600 bps
	CSP19200 - 19200 bps
	CSP38400 - 38400 bps
	CSP57600 - 57600 bps (2834
	CSP115200 - 115200 bps
CRNdd	Dials phone number dd where dd can be up to 20
	characters (0 through 9, *, #, P, T and :). Phone
	number is checked against the Delayed and
	Forbidden Number lists before dialed.
CRIdd;nn	Dials dd same as CRN Command and ignores nn
	identification string. The disregard or connect to
	incoming calls commands are used for auto-answer
	operations.
DIC or CIC	DIC stops the modem from answering incoming
	calls.
	CIC causes the modem to answer incoming calls.

Multi-Tech Systems, Inc. MT2834BA/BL Series User Guide 106