MT202TD User Guide
Computer or Terminal Connections
Your computer or terminal is connected to the MT202TD via the modem’s EIA RS-232C / ITU-T V.24 interface connector. This connector is a standard interface, with a 25-socket female connection. Therefore, your computer or terminal requires a standard RS-232C / V.24 cable with a male connector on the modem end, and a male or female connector at the computer or terminal end, depending upon the computer or terminal connector.
Plug the RS-232C / V.24 cable into the RS-232C / V.24 con- nector on the modem. If screws were provided with your cable, insert and tighten the screws to secure the connection.
Although the RS-232C / V.24 interface connector is designed for 25 signal paths, only eight of these signals are used by the MT202TD.
If your computer or terminal did not come with an RS-232C / V.24 cable, you may purchase a standard “straight-through” RS-232C / V.24 cable from your local computer retailer.
