Multi-Tech Systems MT202TD 1200 Interface, Connectors, Diagnostics, Indicators, Controls, Weight

Chapter 1 - Introduction & Description
Interface	EIA RS-232C / ITU-T V.24
Connectors	One DB-25 RS-232 C connector
	(25-pin female connector),
	external power transformer, RJ11
	line jack
Diagnostics	Analog loopback and digital
	loopback
Indicators	LEDs for Transmit Data, Receive
	Data, Carrier Detect, Clear to
	Send, Request to Send, Data Set
	Ready, and Test Mode
Controls	Switches for analog loopback and
	digital loopback tests, DIP switch
	for 2- or 4-wire leased line
	selection, Local Copy, 0 or -9dBm
	transmit level selection, Request
	to Send, and Receiver Squelch
Operating Temperature	0° to 50° C (32° to 120° F)
Power Requirements	117 VAC, 60Hz, .1 amp
Dimensions MT202TD	10.8 cm wide x 14.8 cm long x 2.9
	cm high
	(4.25 inches wide x 5.8 inches
	long x 1.15 inches high)
Weight	224 g (8 oz.)
Limited Warranty	Two years

7