Safety Warnings

ISI Quick Start Guide

zThis product must be installed by a qualified service person.

zWhen installing or servicing this product, the phone lines must be disconnected to remove the risk of hazardous voltages.

zNever install telephone wiring during a lightning storm.

zNever install telephone jacks in wet locations unless the jack is specifically designed for wet locations.

zThis product is to be used with UL and CUL listed computers.

zNever touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.

zUse caution when installing or modifying telephone lines.

zAvoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electrical shock from lightning.

zDo not use the telephone to report a gas leak in the vicinity of the leak.

To install the ISI Card into your PCI-bus computer, follow the steps presented below.

1.Turn off your computer and any peripheral equipment connected to it. The ISI Card can be installed in a Pentium equivalent PCI bus computer.

2.Remove the cover of your computer as instructed in your computer's documentation.

3.Before handling the ISI Card, discharge any static in your body by touching a piece of grounded metal such as the computer chassis.

Multi-Tech Systems ISI5634UPCI, ISI9234PCIE quick start Safety Warnings