ISI Quick Start Guide
Software Installation
Introduction
The ISI Card ships with software/drivers for each of the following operating systems: Windows® 2008, Vista, XP, 2003, 2000 Server, and 2000 Advanced Server, and Linux. You may need to configure the modems for your country/region, the procedure for doing this is at the end of this Guide.
For additional Windows Operating System Software Installation Procedures, refer to the User Guide.
Installing a device driver modifies your system. For this reason, only the super user (system administrator) is allowed to perform the installation. If you cannot login as administrator, find the person in your organization with this authorization (i.e., password). To begin driver installation, login as administrator.
Driver Installation for Windows Server 2008 and Vista
The following driver installation procedure is based on Windows Server 2008
Card Driver Installation
1.Power up your computer.
2.Windows Server 2008 will detect the ISI Card. A screen from the tray area, at the bottom right of the screen will appear briefly Installing Device Driver Software.
3.The Found New Hardware screen appears for Windows to install driver software for your PCI Serial Port.
Click on Locate and install driver software (recommended). Windows will guide you through the process of installing driver software for your device.
5