Multi-Tech Systems F2 manual SMS Examples, Send an SMS message to another SMS compatible device

Page 17

Chapter 3 – Using Your Wireless Modem

SMS Examples

Send Example

Send an SMS message to another SMS compatible device

at+cmgf=1 (set to text mode)

OK

at+cpms="SM","SM" (set memory storage when writing and sending SMS messages) +CPMS: 0,50,0,50

OK

at+cmgs="7632273726" (send message to the number specified in quotes)

>TEST message ONE. ( Type message after the > symbol and hit <CTRL + Z> to send the message) +CMGS: 52

OK

Receive Examples

Receive Example 1: Receive SMS messages in text mode by saving to SIM memory – Notification via +CMTI unsolicited response code:

at+cmgf=1 (set to text mode)

OK

at+csms=0 (set to Phase 1) +CSMS: 1,1,1

OK

at+cnmi=2,1,0,0,0 (set to display +CMTI indication when SMS is received)

OK

at+cpms="SM","SM" (set the read and write storage of SMS to SIM) +CPMS: 0,50,0,50

OK

+CMTI: "SM",1 (indication that message was received and stored to SIM location 1) at+cmgr=1 (read message stored in location 1)

+CMGR: "REC UNREAD","+17632273726",,"06/03/17,13:55:22+00" TEST1

OK

at+cmgd=1 (delete message that is stored in location 1)

OK

Receive Example 2: Receive SMS message in text mode by directly routing the received message to the TE through the serial port using Phase 2:

at+cmgf=1 (set to text mode)

OK

at+csms=0 (set to Phase 2) +CSMS: 1,1,1

OK

at+cnmi=2,2,0,0,0 (set to receive SMS and route directly to TE)

OK

+CMT: "+17632273726",,"06/03/17,13:59:18+00" (message received and directly routed to TE) TEST2

Multi-Tech Systems, Inc. MultiModem GPRS Wireless Modem User Guide

17

Image 17
Contents MultiModem Gprs S000304M, Revision M Copyright MultiModem Gprs User Guide Wireless ModemRevision History Revision Date Description Trademarks and LogosContents Safety Product Description SpecificationsGeneral Safety RF Interference IssuesVehicle Safety Installation Instructions for Hazardous LocationsMaintenance of Your Modem Package ContentsFunctions GSM Modes SpecificationsMode Description Antenna/RF Specifications Electrical CharacteristicsAT Command Information RS232 15-Pin Connector PinoutInterfaces LEDsInsert the SIM Card into the Holder Activation InstallationActivate Your Wireless Account Antenna Hook up the Antenna, Serial Cable, and PowerPower Optional Attach the Modem to a Flat Surface Verifying That Your Modem Has Been Installed Successfully Install the Modem DriverIntroduction RequirementsExamples of Useful AT Commands Using Your Wireless ModemPhone Numbers for the Wireless Modem Establishing a Voice Call Establishing a Circuit-Switched Data CSD ConnectionAnswering a Circuit-Switched Data CSD Connection Using Short Message Services SMS Send an SMS message to another SMS compatible device SMS ExamplesUsing Your Wireless Modem Connecting to the Gprs Network for Internet Access Internet AccessCreate Your Dial-Up Connection in Windows XP/2003 Disconnecting the ConnectionMobile PhoneTools Troubleshooting Examples Troubleshooting Frequently Asked QuestionsSolutions for ‘no connection through serial link’ situation Solutions for no carrier messageFrequently Asked Questions How do I send an SMS message to an email account? Reference Information Wireless Modem Reference InformationData Cable Diagram No Voice Reference Information Multi-Tech Warranty Statement Appendix a Warranty and RepairsRepair Procedures for U.S. and Canadian Customers Repair Procedures for International CustomersReplacement Parts Repair Procedures for International DistributorsJuly
Related manuals
Manual 29 pages 52.82 Kb