Multi-Tech Systems MT9234ZPX-UPCI quick start Introduction, Safety Warnings, Package Contents

MultiModem Quick Start Guide

Introduction

This guide shows you how to set up your MultiModem ZPX. For detailed information, product specifications, troubleshooting tips, and more, see the User Guide, available on your MultiModem CD.

Check Multi-Tech’s Web site for current versions of our product documentation.

Safety Warnings

•Use this product only with UL- and CUL-listed computers.

•To reduce the risk of fire, use only UL-listed 26 AWG (.41mm) or larger telephone wiring.

•Never install telephone wiring during a lightning storm.

•Never install a telephone jack in a wet location unless the jack is specifically designed for wet locations.

•Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.

•Use caution when installing or modifying telephone lines.

•Avoid using a telephone during an electrical storm; there is a risk of electrical shock from lightning.

•Do not use a telephone in the vicinity of a gas leak.

•The telephone cord is to be disconnected before accessing the inside of the equipment.

Package Contents

•One MultiModem ZPX

•One RJ11 telephone cable

•One printed Quick Start Guide

•One product CD

•One low profile mounting bracket (MT9234ZPX-PCIE models only)

Installing your MultiModem

Installing the MultiModem requires you to open your system. Please consult your system manual in addition to the following instructions.

MT9234ZPX-UPCI

MT9234ZPX-PCIE

1.Turn off your system and unplug it. Failure to do so may result in damage to both the MultiModem and your system. Do not turn on the system until the instructions tell you to do so.

Multi-Tech Systems, Inc. 3