Broadcast Storm Filter
To configure broadcast storm control, enable it and set the upper threshold for individual ports. The threshold is the percentage of the port's total bandwidth used by broadcast traffic. When broadcast traffic for a port rises above the threshold set, broadcast storm control becomes active.
Range: 5%, 10%, 15%, 20%, 25% and off.
Priority Queue Service Settings
Parameter | Description |
First Come First Service | The sequence of packets sent is depend on arrive order. |
All High before Low | The high priority packets sent before low priority packets. |
Weighted Round Robin | Select the preference given to packets in the switch’s |
| queue. These options represent the number of high priority packets |
| sent before one low priority packet is sent. For example, 5 High: 2 |
| Low means that the switch sends 5 high priority packets before |
| sending 2 low priority packets. |
Enable Delay Bound | Limit the low priority packets queuing time in the switch. If the low |
| priority packets exceed Max Delay Time, it will be sent. ‘Max bridge |
| transit delay bound control’ must be enabled before this function will |
| operate. |
| Range: 1~255 ms. |
| Default Max Delay Time: 255ms. |
QoS Policy: High Priority | 0~7 priority level can map to high or low queue. |
Levels |
|
17