MicroNet Technology SP3508A manual Port Sniffer, Port Priority, Path Cost

Page 33

Parameter

Description

Port Priority

Users can make it more or less likely to become the root port. The

 

lowest number has the highest priority. If users change the value, it

 

is necessary to reboot the SP3508A.

 

Range: 0~255.

 

Default: 128.

Path Cost

Specifies the path cost of the port that the SP3508A uses to

 

determine which port are the forwarding ports. The lowest number is

 

forwarding ports. If users change the value, it is necessary to reboot

 

the SP3508A.

 

Range: 1~65535

 

Default: 10Mb/s = 50-600

 

100Mb/s = 10-60

 

1000Mb/s = 3-10

5.11 Port Sniffer

The Port Sniffer is a method for monitor traffic in SP3508A networks. Traffic through ports can be monitored by one specific port. Meaning, traffic goes in or out of monitored ports will be duplicated into sniffer port.

30

Image 33
Contents Port Vdsl Managed Switch User’s ManualModel No. SP3508A Table of Contents Chapter Application Appendix Package Contents Key FeaturesIntroduction Page Hardware Installation InstallationPre-installation Requirements Cabling RequirementsVdsl Port RJ-11 Connecting to Gigabit EthernetConnecting to RJ-11 LED Definition Physical Description10/ACT 100/ACTSwitch Connectors GigabitEthernet IP Address Configuration Out-Band AccessConsole Port Program will enter the following text-based user interface Save EditPrevious Menu Main MenuRemote Access TelnetWeb-Based UI Page Web-Based UI Management Interface HomePort Status Port Statistics Switch Setting IP AddressBasic Advanced Weighted Round Robin First Come First ServiceEnable Delay Bound Broadcast Storm FilterEnable Internet Group Enable Spanning TreeProtocol Multicast Protocol Vlan ProtocolPort Controls SpeedDuplex Link Aggregation Aggregator SettingSystem Priority Group IDState Activity Aggregator InformationIgmp Snooping Filter DatabaseActive PassiveStatic MAC Address MAC Filtering Port SecuritySupport Multiple Vlan Ieee 802.1Q Vlan Vlan ConfigurationSupport Protocol-based Vlan Port VID Ingress Filtering Ingress Filtering Rule Spanning Tree Priority Delay TimeMax Age Hello TimePort Sniffer Port PriorityPath Cost Snmp Location NameContact Read only‘Temperature Alarm’ trap Signal to Noise Ratio‘Fan Speed Alarm’ trap Security ManagerPassword Tftp Update FirmwareReconfirm Password UsernameConfiguration Backup Tftp Restore ConfigurationTftp Backup Configuration Reset and Rebooting System ResetReboot Bridging Functions ApplicationAppendix Appendix a SpecificationsDimension Appendix B Troubleshooting Power and Cooling Problems Appendix C System DiagnosticsInstallation Transmission ModePhysical Configuration CablingSystem Integrity Vdsl Technology Requirements & Definitions Appendix D Vdsl SpectrumPort-Based Vlan Setting Appendix E Example of Vlan SettingTag-Based Ieee 802.1Q Vlan Setting Page Page