MicroNet Technology SP756, SP755D user manual Hardware Installation

Page 16

2.Hardware Installation

Unpack the print server package and verify that all the items listed in the section 1.2 are provided.

Connect the print server to the printer you want to share on the network.

Connect the print server to your network by attached the network cable to the UTP port of the print server.

Connect the power adapter to the print server. The print server will perform the Power-On-Self-Test (POST) after it is powered on. During the POST, the Status and Ready LEDs will be on. When the LEDs are unlighted, the print server is ready.

NOTE1: MUST use the power adapter shipped with the print server, do NOT use any other power adapter from any sources.

NOTE2: To prevent the compatibility problem between print server and a few printer, it is recommended that you power on the print server before the printer.

11

Image 16
Contents MicronetR Copyright Contents Netware Network IPP Printing Product Introduction IntroductionProduct Package Network Printing Architecture Network Printing EnvironmentPrint Server Network Functions Print ServerNetwork Printing Functions for Clients Client UserMAC OS Network Printing Functions for Network Server Network ServerNetwork Printing Environment NetWare Network see below Contents of the User’s Manual Firmware & Printing Function Hardware Installation Peer-to-Peer Network System ArchitectureAdministrator Installation and Setup Page Page Page Page Page Page Administrator Utilities Client Installation and Setup Page Page To add network ports of print servers manually Page Client Utilities Network Ports Quick Setup Page Remote Ports Utility Page Windows Add Printer Procedure Page Page Page Windows NT/2000/2003 Installation and Setup User Installation and Setup NetWare Network NetWare 3.x/4.x/5.x Installation & Setup Installation Using PconsolePage Page Page Unix System Network Enable Print Server’s TCP/IP SupportIntroduction Bootp Setup Print Server’s IP AddressDhcp Ha=printserverethernetaddress\ ip=printserveripaddress Verify Print Server’s IP Address Remote LPD Printing on the HostPage Configuration Utility Search for All Available Print Server Status of Print Server Setup the Print Server General Configuration TCP/IP Configuration Page Netware Print Server Configuration AppleTalk Configuration Snmp Configuration SMB Configuration System Configuration Wizard Page Page Page Report Login Web ManagementDevice Status SystemPrinter 3 TCP/IP 4 SMB Snmp NetWare AppleTalk Setup Wizard Advanced Settings 2 TCP/IP 3 SMB Snmp NetWare AppleTalk Enable Enable or disable AppleTalk Save Settings Load Default System ToolsUpgrade Firmware from Browser System Setup IPP PrintingPrint Server Side Client SidePage Page Page Page Windows XP SP2 Setup Select Advanced tab and click Settings… Select Exceptions tab and click Add Program… Click Browse to add a new program Page