MicroNet Technology SP756, SP755D user manual

Page 46

9.Press Enter to select the newly created print server.

10.Select Print Server Configuration.

11.Select Printer Configuration.

12.Select Printer 0 (or Printer 1, Printer 2), and press Enter, then select LPT1 (or LPT2, LPT3) in the Type field. If your print server is with only one port, you do not need to configure this Type field.

13.Press Escape, and answer Yes to the Save Changes question.

14.Select Queues Serviced by Printer, then select Printer 0 (or Printer 1, Printer 2) and press Enter.

15.Press Insert and add your newly created print queue to the list of queues serviced by the printer. Enter a priority number for the queue service, or press Enter to accept the default.

41

Image 46
Contents MicronetR Copyright Contents Netware Network IPP Printing Product Introduction IntroductionProduct Package Network Printing Architecture Network Printing EnvironmentPrint Server Network Functions Print ServerNetwork Printing Functions for Clients Client UserMAC OS Network Printing Functions for Network Server Network ServerNetwork Printing Environment NetWare Network see below Contents of the User’s Manual Firmware & Printing Function Hardware Installation Peer-to-Peer Network System ArchitectureAdministrator Installation and Setup Page Page Page Page Page Page Administrator Utilities Client Installation and Setup Page Page To add network ports of print servers manually Page Client Utilities Network Ports Quick Setup Page Remote Ports Utility Page Windows Add Printer Procedure Page Page Page Windows NT/2000/2003 Installation and Setup User Installation and Setup NetWare Network NetWare 3.x/4.x/5.x Installation & Setup Installation Using PconsolePage Page Page Unix System Network Enable Print Server’s TCP/IP SupportIntroduction Bootp Setup Print Server’s IP AddressDhcp Ha=printserverethernetaddress\ ip=printserveripaddress Verify Print Server’s IP Address Remote LPD Printing on the HostPage Configuration Utility Search for All Available Print Server Status of Print Server Setup the Print Server General Configuration TCP/IP Configuration Page Netware Print Server Configuration AppleTalk Configuration Snmp Configuration SMB Configuration System Configuration Wizard Page Page Page Report Login Web ManagementDevice Status SystemPrinter 3 TCP/IP 4 SMB Snmp NetWare AppleTalk Setup Wizard Advanced Settings 2 TCP/IP 3 SMB Snmp NetWare AppleTalk Enable Enable or disable AppleTalk Save Settings Load Default System ToolsUpgrade Firmware from Browser Print Server Side System SetupIPP Printing Client SidePage Page Page Page Windows XP SP2 Setup Select Advanced tab and click Settings… Select Exceptions tab and click Add Program… Click Browse to add a new program Page