MicroNet Technology SP755D, SP756 user manual Installation and Setup

Page 41

4.2Installation and Setup

Please follow the procedures described below for installation and construct a peer-to-peer connection (PTPP) between Windows NT/2000/2003 Server and Print Server.

Step1.

If this is your first time installing print server, please install the administrator software on Windows NT/2000/2003 server first. Refer to section 3.2 for installation instructions.

If your network has already installed a working print server and your Windows NT/2000/2003 server has not yet installed the PTPP driver, please install the client software. Refer to section 3.4 and 3.5 for installation instructions.

Step2.

Please add/configure the Peer-to-Peer Printing of the Windows NT/2000/2003 network printer and verify that you can print from Windows NT/2000/2003 to the print server by the installed PTPP driver.

Step3.

Share the above server’s printer to the network by performing the standard Windows printer sharing process.

36

Image 41
Contents MicronetR Copyright Contents Netware Network IPP Printing Product Package IntroductionProduct Introduction Network Printing Environment Network Printing ArchitecturePrint Server Print Server Network FunctionsClient User Network Printing Functions for ClientsMAC OS Network Server Network Printing Functions for Network ServerNetwork Printing Environment NetWare Network see below Contents of the User’s Manual Firmware & Printing Function Hardware Installation System Architecture Peer-to-Peer NetworkAdministrator Installation and Setup Page Page Page Page Page Page Administrator Utilities Client Installation and Setup Page Page To add network ports of print servers manually Page Client Utilities Network Ports Quick Setup Page Remote Ports Utility Page Windows Add Printer Procedure Page Page Page Windows NT/2000/2003 Installation and Setup User Installation and Setup NetWare Network Installation Using Pconsole NetWare 3.x/4.x/5.x Installation & SetupPage Page Page Introduction Enable Print Server’s TCP/IP SupportUnix System Network Dhcp Setup Print Server’s IP AddressBootp Ha=printserverethernetaddress\ ip=printserveripaddress Remote LPD Printing on the Host Verify Print Server’s IP AddressPage Configuration Utility Search for All Available Print Server Status of Print Server Setup the Print Server General Configuration TCP/IP Configuration Page Netware Print Server Configuration AppleTalk Configuration Snmp Configuration SMB Configuration System Configuration Wizard Page Page Page Report Web Management LoginSystem Device StatusPrinter 3 TCP/IP 4 SMB Snmp NetWare AppleTalk Setup Wizard Advanced Settings 2 TCP/IP 3 SMB Snmp NetWare AppleTalk Enable Enable or disable AppleTalk Save Settings System Tools Load DefaultUpgrade Firmware from Browser IPP Printing System SetupPrint Server Side Client SidePage Page Page Page Windows XP SP2 Setup Select Advanced tab and click Settings… Select Exceptions tab and click Add Program… Click Browse to add a new program Page