MicroNet Technology SP3367N user manual Nat

Page 26

 

Parameter

 

Description

 

 

 

 

 

Service Name

 

Enter the name of your ISP.

 

User Name

 

Enter the username exactly as your ISP assigned.

 

Password

 

Enter the password that your ISP has assigned to you.

 

 

 

Please check with your ISP the method of multiplexing. In

 

Encapsulation

 

Bridge Mode, please select “1483 Bridge IP LLC” or “1483

 

 

Bridge IP VC-Mux”. In PPPoE/PPPoA mode, please select

 

 

 

“PPPoE LLC”, “PPPoE VC-Mux”, “PPPoA LLC”, or “PPPoA

 

 

 

VC-Mux”.

 

 

 

This router has built-in ADSL modem and is able to connect

 

Bridge Interface

 

to ISP directly. Alternatively, if you want to use the dial up

 

 

software to manually connect to the ISP, you have to activate

 

 

 

 

 

 

the”Bridge Interface”.

 

 

 

Always On – The connection will be kept always on. If the

 

 

 

connection is interrupted, the router will re-connect

 

 

 

automatically.

 

 

 

Connect On-Demand– Only connect when you want to surf

 

Connection

 

the Internet. “Close if idle for xx minutes” is set to stop the

 

 

connection when the network traffic is not sending or

 

 

 

receiving after an idle time.

 

 

 

Connect Manually – After you have selected this option,

 

 

 

please go to Status page. You will see the “Connect” button,

 

 

 

click it and the router will connect to the ISP. If you want to

 

 

 

stop the connection, please click “Disconnect” button.

 

 

 

The “TCP MSS Option” enables the configuration of the

 

 

 

maximum segment size (MSS) for transient packets that

 

TCP MSS Option

 

traverse a router, specifically TCP segments in the SYN bit

 

 

set, when PPPoE is being used in the network. Please specify

 

 

 

 

 

 

the MSS range from 100 to 1452 bytes or 0 byte as the

 

 

 

default value.

 

Get IP Address

 

Choose Static or Dynamic IP Address. If Static IP is selected,

 

 

please set the IP Address, Subnet Mask and Gateway

 

 

 

obtained from your ISP.

 

Static IP Address

 

Enter the IP Address assigned by your ISP.

 

IP Subnet Mask

 

Enter the Subnet Mask assigned by your ISP.

 

Gateway

 

Enter the Gateway assigned by your ISP.

 

 

 

NAT (Network Address Translation), an Internet standard that

 

 

 

enables a local-area network (LAN) to use one set of IP

 

NAT

 

addresses for internal traffic and a second set of addresses

 

 

for external traffic. When NAT is enabled, the router will help

 

 

 

 

 

 

to make all necessary IP address translations for the PC

 

 

 

connected to the router to access the Internet.

 

Default Route

 

When “Default Router” is enabled, all the packets for

 

 

destinations not known by the router's routing table are sent

 

 

 

to the default route. By default, it is enabled.

 

 

 

MTU (Maximum Transmission Unit) determine the maximum

 

TCP MTU Option

 

size of each packet in any transmission within the network.

 

 

Please specify the MTU range from 100 to 1500 bytes or 0

 

 

 

 

 

 

byte as the default value.

 

 

23

Image 26
Contents User’s Manual 11N ADSL2+ Modem Router Model No. SP3367N Table of Contents Glossary Certifications Package Contents Key FeaturesSafety Information ¾ DMZSpecifications StandardsSecurity Features Antenna ResetBack Panel JackLAN Front PanelWlan System and Network Setup Build Network ConnectionWindows 95/98/Me Connecting to Web-Based ManagementIP Address Configuration Page Windows Windows XPWindows Vista Page Router’s IP Address Starting Web-Based Management UI Page Set User Password Quick Start WizardTime Zone Dynamic IP Address Bridge ModeBroadband Type Static IP AddressEnter the Internet account details provided by ISP Interface SetupInternet VPI ATM VCVirtual Circuit VCISCR ATM QoSPCR MBSNAT 2 LAN Dhcp Wireless Dtim MCSWMM SsidWPA2-PSK WEP/WPA-PSK/WPA2-PSK & WPA-PSK/WPA2-PSKWPA-PSK WPA-PSK/ WPA2-PSKAction Wireless MAC Address FilterActive Mac Address #1-8Routing Advanced SetupFirewall FirewallMask Routing Table ListDest IP Gateway IPAnnounced in RIP 3 NATGateway IP Address NAT StatusDMZ Host IP Address DMZ setting forDMZ Virtual ServerApplication Virtual Server forRule Index Start Port NumberAdsl Type Adsl ModeAdsl ACL Access Management1 ACL Filter IP/ MAC Filter IP/ MAC Filter Set EditingDirection IP/MAC Filter SetIndex Interface IP / MAC Filter Rule EditingURL Filter ICQ/MSN/YMSG/ RealAudio/Video URL IndexURL SnmpUPnP Get CommunityUPnP Auto-configuredDdns My Host Name Service ProviderDynamic DNS Mail AddressNew Password MaintenanceAdministrator Confirm PasswordFirmware Diagnostics System RestartSystem Log StatusDevice Info Statistics Bridge 10Base-TBps Ethernet Default Gateway RouterDNS Server IP Address MAC Address Idle TimeoutISP Gateway Address PortProtocol PPPoA RFCPPPoE RFC Application Protocol Port NumberSubnet Mask RFCRouter VCI Web-based management Graphical User Interface GUI

SP3367N specifications

MicroNet Technology, a pioneer in the realm of high-performance networking solutions, has introduced the SP3367N, a state-of-the-art networking device that encapsulates a multitude of advanced features and technologies. Designed specifically for small to medium-sized businesses, the SP3367N aims to provide robust connectivity and network management capabilities.

One of the standout features of the SP3367N is its support for multi-gigabit Ethernet, enabling data transmission rates exceeding traditional Gigabit solutions. This allows businesses to streamline their operations and enhance data throughput, crucial for environments that require high data volumes, such as video conferencing and large file transfers.

The SP3367N is built around a powerful dual-core processor that enhances routing and switching performance. With superior processing capabilities, it efficiently handles multiple simultaneous connections, ensuring minimal latency and superior user experiences. This is complemented by its advanced Quality of Service (QoS) technology, which prioritizes network traffic, ensuring that critical applications receive the bandwidth they need during peak usage times.

Security is another critical aspect of the SP3367N. It incorporates comprehensive security protocols, including advanced firewall features and VPN support, providing a reliable barrier against unauthorized access. Businesses can trust that their sensitive data remains protected while enjoying secure remote access for employees and clients.

In terms of connectivity, the SP3367N boasts a plethora of ports, including multiple 10/100/1000 Mbps Ethernet ports, allowing for seamless integration with existing network infrastructures. Additionally, it features USB ports for network storage sharing and management, and supports both IPv4 and IPv6 protocols, making it future-proof as networks evolve.

MicroNet Technology also emphasizes ease of management with the SP3367N. Its user-friendly web interface allows for a straightforward configuration process, while advanced management features such as SNMP support enable IT teams to monitor network performance actively.

Lastly, the device is energy-efficient, adhering to eco-friendly standards without compromising performance. This balance of efficiency and capability makes the MicroNet Technology SP3367N an ideal choice for businesses eager to enhance their network infrastructure without sacrificing security or speed.