|
| Parameter |
| Description |
|
|
|
|
|
|
| IP/MAC Filter Set |
| This is the item number to record the setting. |
|
| Index |
| |
|
|
|
| |
|
| Interface |
| Select which channel (PVC) to configure. |
|
| Direction |
| Select the access to the Internet (Outgoing) or from the |
|
|
| Internet (Incoming), or Both. | |
|
|
|
| |
IP / MAC Filter Rule Editing |
| |||
|
| Parameter |
| Description |
|
|
|
|
|
|
| IP/MAC Filter Rule |
| This is the item number to record the setting rule. |
|
| Index |
| |
|
|
|
| |
|
| Rule Type |
| Select to filter through the IP Address or MAC Address. |
|
| Active |
| Select “Yes” to enable the current rule, select “No” to cancel |
|
|
| the current rule. | |
|
|
|
| |
|
| Source IP Address |
| Enter the start IP Address which will be monitored. If “0.0.0.0” |
|
|
| is set, it means for any IP Address. | |
|
|
|
| |
|
| Subnet Mask |
| Enter the Subnet Mask based on the Source IP Address. |
|
|
|
| LAN users use port number to distinguish one network |
|
| Port Number |
| application over another such as 21 is for FTP service. The |
|
|
| port number range is from 0 to 65535. It is recommended that | |
|
|
|
| |
|
|
|
| this option be configured by an advanced user. |
|
| Destination IP |
| Enter the start IP Address which will be monitored. If “0.0.0.0” |
|
| Address |
| is set, it means for any IP Address. |
|
| Subnet Mask |
| Enter the Subnet Mask based on the Destination IP Address. |
|
| Port Number |
| This is the port or port ranges that define the application. |
|
| Protocol |
| It is the packet protocol type used by the application. Please |
|
|
| select “TCP”, “UDP” or “ICMP”. For example, FTP service, | |
|
|
|
| you have to select “TCP”. |
|
| Rule Unmatched |
| Select action for the traffic mismatching current rule. |
|
|
| “Forward” is to leave it pass through. “Next” is to check it by | |
|
|
|
| the next rule. |
Application Filter |
|
39