MicroNet Technology SP5530 user manual Ping Your IP Address, Internet Camera Installation

Page 57

Internet Camera Installation

Q:Can the Internet Camera be used outdoors?

A:The camera is not weatherproof. It needs to be equipped with a weatherproof case to be used outdoors, and it is not recommended.

Q:What network cabling is required for the camera?

A:The camera uses Category 5 UTP cable with RJ-45 connector, which allows 10 Base-T and 100 Base networking.

Q:Can the camera be set up as a PC-cam on the computer?

A:No, the camera is an Internet Camera used only on Ethernet and Fast Ethernet network and supported by wireless transmission.

Q:Can the camera be connected on the network if it consists of only private IP addresses?

A:The camera can be connected to LAN with private IP addresses.

Q:Can the camera be installed and work if a firewall exists on the network?

A:If a firewall exists on the network, port 80 is open for ordinary data communication. However, since the camera transmits image data, the default ports 5000, 5001 and 5100 are also required. Therefore, it is necessary to open ports 5000, 5001 and 5100 of the network for remote users to access the camera.

B. PING Your IP Address

The PING (Packet Internet Groper) command can determine whether a specific IP address is accessible by sending a packet to the specific address and waiting for a reply. It can also provide as a very useful tool to confirm if the IP address conflicts with the camera over the network.

Follow the step-by-step procedure below to utilize the PING command. However, you must disconnect the camera from the network first.

Start a DOS window.

Type ping x.x.x.x, where x.x.x.x is the IP address of the camera.

The replies in the following Trouble shooting section will provide useful explanation to the cause of the problem with the camera IP address.

- 54 -

Page 56 Page 58
Image 57
Page 56 Page 58
Contents Internet Camera with Pan/Titl/Zoom FCC Certifications Table of Contents About this Manual Introduction Simple to UseSupport Variety of Platforms Web Configuration Remote UtilityBroad Range of Applications Accessing the Camera NetworkingFront Panel Reset Button DC Power ConnectorNetwork Cable Connector Rear PanelAttaching the Metal Clip Hardware InstallationAttaching the Power Supply Security Applications Application CameraHome Applications Soho Applications Application Diagrams of the CameraEnterprise Applications Web Configuration Utility Using the CameraVideo Show Adjust the Image Brightness Adjust the Viewing AngleZoom On / Zoom Off Audio FunctionBasic Setup NightShotBasic J Network Required data in the User Name, Password and Domain Name Basic J Camera NameBasic J Time Zone Basic J Report Advanced Setup Image SettingAdvanced J Video Location Setting Motion Detection PPPoE Advanced J NetworkDdns Recording Advanced J ToolsRecording Method PortMail Advanced J Timezone Advanced J AccountMaintenance J Configuration MaintenanceReset Default Idle TimeStatus RebootMaintenance J Firmware Upload Help LogoutInstalling FFdshow Ffdshow & AvisaviorStep Step Configuration of FFdshow Playing the Video Fixing the Video File Click the Start to Fix button to start fixing Ipview PRO InstallationRead and accept the License Agreement, and then click Yes Click Finish to complete the installation Getting Started Item FeatureRecord Select Manual Record, Schedule Record, or MotionUsing IPView Pro Adding a CameraTo add a camera Viewing a Camera Removing a CameraPlaying Recorded Video Recording VideoConfiguring the System Camera ConfigurationWeb Configuration Motion Configuration-2 Motion Configuration-1Tools Proxy Server Mailing ConfigurationSchedule-Recording Configuration Recording ConfigurationOthers Account Log ListAbout Frequently Asked Questions Internet Camera FeaturesAppendix Ping Your IP Address Internet Camera InstallationTrouble Shooting Page Time Zone Table Adjust Internet Camera Focus Video specification SpecificationImage Video Setting AudioGlossary of Terms SoftwareOperating Environment Dhcp HEX RJ-45 connector is used for Ethernet cable connections TCP/IP

SP5530 specifications

MicroNet Technology SP5530 is an advanced integrated circuit designed to meet the demands of modern data processing applications. Positioned at the forefront of microcontroller technology, the SP5530 combines high performance, low power consumption, and versatile connectivity options, making it an ideal choice for a variety of embedded systems and IoT devices.

One of the standout features of the SP5530 is its powerful ARM Cortex-M4 processor core, which operates at a clock speed of up to 120 MHz. This robust processing capability ensures quick and efficient handling of complex algorithms and data-intensive tasks. Alongside the processing power, the SP5530 integrates a floating-point unit (FPU) that enhances the performance of mathematical computations, crucial for applications such as digital signal processing and control systems.

Power efficiency is another key characteristic of the SP5530. With its low-power design, the microcontroller is suitable for battery-powered devices, allowing for extended operational lifetimes. The device features multiple power modes that allow it to enter sleep or deep-sleep states when inactive, conserving energy while maintaining quick wake-up times.

In terms of connectivity, the SP5530 supports a range of interfaces including SPI, I2C, UART, and PWM. This flexibility facilitates seamless communication with other devices and sensors, enabling developers to create sophisticated systems that can easily interact with the environment. Additionally, the SP5530 features an integrated ADC (Analog-to-Digital Converter) that provides high-resolution readings from analog sensors, further enhancing its usability in IoT applications.

The SP5530 also boasts robust memory options, including flash memory for program storage and RAM for data processing. This allows developers to implement complex applications without the need for external memory components, simplifying circuit design and reducing overall system cost.

Overall, the MicroNet Technology SP5530 microcontroller is a versatile and efficient solution tailored for today's requirements in embedded systems and IoT environments. With its combination of processing power, energy efficiency, rich connectivity options, and integrated features, it stands out as a reliable choice for developers aiming to push the boundaries of innovation in their projects.
Top Page Image Contents