MicroNet Technology manual OS-X 10.4.10 Host Setup The MaxNAS has been tested

4-Connecting Users

3.1.6Right-click on the iSCSI volume. If it’s not initialized a red “No Entry” logo will cover the disk icon. Right click on the disk and select “Initialize Disk.” Follow the on-screen instructions.

3.1.7Right click the initialized

volume (The area right of the
disk icon.) In the context menu
select “New Partition.” Follow the
on screen instructions. In the File
System pop-up menu, select NTFS.
The default formatting option is
Full format. A Quick format will
take just a few minutes but will do
less verifying of the drive than a
full format. Click Start. Once the
format process is complete your
iSCSI volume is ready to use.	3.1.6	3.1.7

3.2OS-X >10.4.10 Host Setup The MaxNAS has been tested and

qualified for use with the GlobalSAN initiator from Studio Network Solutions. It can be obtained from their web site at http://www.studionetworksolutions.com.

!Before you begin please make sure you are logged in with administrative privileges. If you are unsure about your privilege level, please consult your Macintosh OS-X user manual or with your system administrator.

3.2.1Download and install the GlobalSAN initiator. Follow the installation instructions provided on the website.

3.2.2Launch the globalSAN iSCSI initiator control from the System Preference Pane (/Applications/System Preferences.app)

3.2.3Click (illustrated below). In the

IP Address entry box enter the IP address of the MaxNAS and the iSCSI Qualified Name (IQN) in the target name field. The IQN is listed in the MaxNAS iSCSI target page (see Chapter 3, section 2.2.6 for more information). Click OK to continue.

MaxNAS Owner’s Manual 46