Murphy LS200N, L1100 manual Trip Cam Operating Lever Orientation

Page 10

3.Valve seat adjustment can be made if air/gas begins to leak. Care should be taken when adjusting as only slight movement is necessary to stop the leakage; excessive force will bind the seating mechanism. See the instruction below for adjustment.

CAUTION: Avoid excessive Teflon tape which may inhibit proper operation.

Trip Cam Operating Lever Orientation

The LS200 series level switches are shipped with the trip cam orientation set for normal operation, or vent on rising level. If the application requires a vent on falling level, the trip cam operating lever can be moved to the alternate position as indicated in the diagram below. Gently depress the cam and rotate to the other lever position. Make sure the cam returns to the full height position with the cam lever resting fully in the grove.

Section 15

00-02-0563

01-11-06

- 6 -

Image 10
Contents LS200, LS200N LS200NDVOR Series L1100 Liquid Level Switches Before Beginning Installation of this Murphy Product Table of Contents This page Intentionally Left Blank Product Information FeaturesLS200 LS200NDVOR LS200NDVO LS200NDirect Installation into the Wall of the Pressure Vessel Pressure Vessel Installation LS200, LS200N and L1100Installation with a Weld Collar Installation Using Murphy External Float Chamber Installation and Adjustment for Pneumatic ModelsTrip Cam Operating Lever Orientation Replacing and Installing the DVO Assembly Models LS200NDVO & LS200NDVOR Tools NeededInstructions DVOOrifice Adjustment with float Electrical Replacement Parts LS200NDVO and LS200NDVORWeld Collar AccessoriesL1100 55050617 DVU150/DVU175 Adapter BushingExternal Float Chamber CB External Float ChamberFloat Shaft Extension Specifications All ModelsSection 00-02-0563 01-11-06