Milan Technology MIL-S501SC-15, MIL-S501SC-70, MIL-S501ST, MIL-S501MT-15, MIL-S501VF-15, MIL-S501SC-40

Page 11

nRJ-45 Ports: Five 10/100 N-Way auto-sensing for 10Base-T or 100Baes-TX connections.

nUplink Port: One uplink port to cascade to a hub or switch, with the maximum distance between the switch to another device is 100 meters.

n100Base-FX Fiber Port: There are 5 types of fiber connectors available for the MIL-S501xx as shown above. The distance for fiber cabling can be extended up to 2 kilometers for multi-mode fiber and up to 70 kilometers for single-mode fiber.

nDIPswitch: the DIPswitch is to select Full duplex or Hall- duplex mode for the fiber port.

nDC Power Connector: Plug DC Power Adapter’s female end into this device, and the male end of DC Power Adapter into an AC outlet. The Adapter supplies 5VDC at 2.5 Amps to the Switch.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents MIL-S501xx Series Document Warranty Contents Introduction Package Content FeaturesMIL-S501XX DC power Adapter User’s Manual Warranty CardFront Panel Hardware DescriptionLED LED IndicatorsRear Panel Rear Panel of the MIL-S501xx with SC ConnectorMIL-S501xx with ST Connector Page Network Application Collapsed Backbone Application Transmission Mode Diagnosing LED IndicatorPower Cabling EMI Appendix 100BaseTX Physical Layer Media Access Control MAC LayerMedia Independent Interface MII Layer Page Full-duplex Store-and-Forward Switching
Top Page Image Contents