LED Indicators of 100base-FX, Link | Milan Technology MIL-S2400

LED Indicators of 100base-FX

The LED-Indicators provide a real-time information of systematic operation status. The following table provides descriptions of LED Indicators status and their meaning.

LED

Status

Description

Blinks

This fiber port is transmitting data.

Off

No data is be transmitted.

	Blinks	This fiber port is receiving data.
RX
	Off	No data is being received.

	Yellow	The port is connecting with the device.
Link
	Off	No device attached.

	Yellow	The port is operating in Full-duplex mode.
FD/COL
FD/COL	Blinks	Collision of is occuring

	Off	No device attached or in half-duplex mode .

Table 3-1. The Description of LED-Indicators on 100Base-FX Modules

Features / Specifications of the 100Base-FX

nConforms to IEEE 802.3u 100Base-FX & 802.3x Full Duplex Flow Control standard

nOne-port 100Mbps optical fiber module

nLED-indicators for TX, RX, Link, and FDX/COL (4 LEDs)

nOne DIP-switch to select fiber port for Full-duplex or Half-duplex.

nMax. Forwarding Rate: 148810 pps for 100Base-FX (Wire speed)

nDimensions: 102mmx 71mmx 24mm ( 4” x 2.8” x 1” )

nWeight : 60 ±5g

nOperating Temperature : 0 ~ 45 C (31 ~ 113 F)

nEnvironment Humility : 10% ~90% ( Non-condensing )

nEMI : FCC Class A, CISPR 22 Class A

nSafety: UL, cUL and TUV

Milan Technology MIL-S2400, MIL-S1600 manual LED Indicators of 100base-FX, Link

LED Indicators of 100base-FX

Link

FD/COL