SMART 216 / 232 IP
26. Accessing a Target server
Log in to the web interface as explained on page 13. The web interface opens at the Targets page, see Figure 14 on page 15. To connect to a Target or serial device, click the desired Target/device in the Server Name Column. (A server being used by another user cannot be accessed). The screen of the Target/device appears inside a remote console window. Note! For a User, only permitted Targets appear on the Targets page. Figure 28 illustrates the remote console window.
Server name
Toolbar icon
Remote screen border
Minicom icon
Figure 28 Remote console window
On the remote console you have the following:
Server name - The currently accessed server identity can be checked any time by looking at the Server name on the Internet Explorer title bar.
Toolbar icon – This is the minimized toolbar from which you switch and configure the system.
Minicom icon – Hold the mouse over the icon to view information about current server, connection time and video mode.
26.1The Toolbar
To maximize the Toolbar:
Click the arrow 
. Click again to minimize the Toolbar.
27