SMART 216 / 232 IP
26.5 Power cycle
Where a Minicom Serial Remote Power Switch is connected to Serial 1 port of the IP Control, you can power manage the Target servers as follows:
From the Toolbar, click 
. The Power menu appears, see below.
Figure 31 Power menu
To send a power cycle command or to power down or up the currently accessed Target server, select the appropriate option.
Note! Only the currently accessed Target server is affected, so to power manage other Target servers you must access each one individually.
26.6 Keyboard key sequences
Click 
. A list of defined keyboard sequences appears. When clicked, these transmit directly to the Target server, and will not affect the Client computer.
For example, select
To add a keyboard sequence:
Click Add/Remove. The Special Key Manager box appears see Figure 32.
Figure 32 Special Key Manager box
To add a predefined sequence:
1. Click Add Predefined. A list of sequences appears.
31