TROUBLESHOOTING
1.Make sure the 
(Power LED) is ON.
2.Verify that Link LED’s are ON for connected ports.
3.Verify cabling used between stations.
4.Verify that cabling is Category 5 (or greater) for 100Mbit Operation.
5.Verify TX is connected to far end RX and vise versa (fiber optic units only).
SUPPORT
Contact
FCC STATEMENT
This product complies with Part 15 of the
Operation is subject to the following conditions:
(1)This device may not cause harmful Interference
(2)This device must accept any interference received, including interference that may cause undesired operation.
12/29/2005 | 11 |