N-Tron 300 manual Electrical Safety, Laser Safety FXE Products Only

Page 4

Safety Warnings

ELECTRICAL SAFETY

WARNING: Disconnect the power cable before removing the enclosure top.

WARNING: Do not operate the unit with the top cover removed.

WARNING: Do not work on equipment or cables during periods of lightning activity.

WARNING: Do not perform any services on the unit unless qualified to do so.

WARNING: Do not block the air vents.

WARNING: Observe proper DC Voltage polarity when installing power input cables. Reversing voltage polarity can cause permanent damage to the unit and void the warranty.

LASER SAFETY (FXE Products Only)

WARNING: CLASS 1 Laser Product, Do not stare into the laser

12/29/2005

4

Image 4
Contents Installation Guide Where XX = ST or SC and YY = -15, -40, or 12/29/2005 Electrical Safety Laser Safety FXE Products OnlyHazardous Location Installation Requirements Series Industrial Ethernet Switches Key FeaturesInstallation Package ContentsUnpacking DIN-Rail Mounting 300-PM900-PM 900-RMACT LNKLED Applying Power Top View Connecting the UnitTroubleshooting Support FCC StatementRecommended Minimum Wiring Clearance Emissions and Safety ApprovalsTron Limited Warranty