Maxim manual MAX4888A/MAX4889A 0Gbps PCI Express Passive Switches

MAX4888A/MAX4889A

5.0Gbps PCI Express Passive Switches

ABSOLUTE MAXIMUM RATINGS

(All voltages referenced to GND, unless otherwise noted.)			Continuous Power Dissipation (TA = +70°C)
V+		-0.3V to +4V	28-Pin TQFN (derate 20.8mW/°C above +70°C) ....		1666.7mW
SEL, COM__, NO__, NC__ (Note 1)	-0.3V to (V+ + 0.3V)		42-Pin TQFN (derate 35.7mW/°C above +70°C) ....		2857.1mW
COM__ - NO__ , COM__ - NC__ (Note 1)		...................0 to 2V	Operating Temperature Range	-40°C to +85°C
Continuous Current (COM_ to NO__/NC__)		±70mA	Storage Temperature Range	-65°C to +150°C
Peak Current (COM__ to NO__/NC__)			Lead Temperature (soldering, 10s)		+300°C
(pulsed at 1ms, 10% duty cycle)		±70mA	Junction Temperature		+150°C
Continuous Current (SEL)		±30mA
Peak Current (SEL)
(pulsed at 1ms, 10% duty cycle)		±150mA

Note 1: Signals on SEL, NO__, NC__ or COM__ exceeding V+ or GND are clamped by internal diodes. Limit forward-diode current to maximum current rating.

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

ELECTRICAL CHARACTERISTICS

(V+ = 3.0V to 3.6V, TA = -40°C to +85°C, unless otherwise noted. Typical values are at V+ = 3.3V, TA = +25°C.) (Note 2)

PARAMETER	SYMBOL	CONDITIONS	MIN	TYP	MAX	UNITS
ANALOG SWITCH
Analog-Signal Range	VCOM_,		-0.1		(V+ - 1.2)	V
	VNO_, VNC_
	VCOM_ -
Voltage Between COM and	VNO_ ,		0		1.8	V
NO/NC	VCOM_ -
	VNC_
On-Resistance	RON	V+ = 3.0V, ICOM_ = 15mA,		7		Ω
		VNO_ or VNC_ = 0V, 1.8V
On-Resistance Match Between	ΔRON	V+ = 3.0V, ICOM_ = 15mA,		0.1	1	Ω
Pairs of Same Channel		VNO_ or VNC_ = 0V (Notes 3, 4)
On-Resistance Match	ΔRON	V+ = 3.0V, ICOM_ = 15mA,		0.6	2	Ω
Between Channels		VNO_ or VNC_ = 0V (Notes 3, 4)
On-Resistance Flatness	RFLAT(ON)	V+ = 3.0V, ICOM_ = 15mA		0.06	2	Ω
		VNO_ or VNC_ = 0V, 1.8V (Notes 4, 5)
NO_ or NC_ Off-Leakage	INO_(OFF)	V+ = 3.6V, VCOM_ = 0V, 1.8V,	-1		+1	µA
Current	INC_(OFF)	VNO_ or VNC_ = 1.8V, 0V
COM_ On-Leakage	ICOM_(ON)	V+ = 3.6V, VCOM_ = 0V, 1.8V,	-1		+1	µA
Current		VNO_ or VNC_ = VCOM_or unconnected

2 _______________________________________________________________________________________