Cary Audio Design SLP-308 installation manual Rear Apron Features

Page 4

Power Switch: 2 position toggle switch off/on controls the AC line voltage

Mute: Terminates (quiets) the output, also operated via remote hand set

Input Select: 4 position rotary switch controls relay input switching

Tape Monitor: 2-position toggle switch engages tape loop circuit

Listening Level: Motorized volume control, manual or via remote, with additional blue indicator LED in the volume knob.

Dual Output Level Meters: These show output level voltage to the power amplifier, 0 dB is equivalent to 0.775 volts output.

On LED: Indicates internal power supply is power up

Operate LED: Indication of time delay release (approximately 1 minute)

Down LED: Lights up red as remote volume is turned to a lower setting.

Up LED: Lights up blue as the remote volume is turned to a higher setting.

REAR APRON FEATURES

AC Connector: Inlet for the detachable AC power cord, standard IEC plug

AC Fuse: !!VERY IMPORTANT!! ONLY USE 1 AMP Slow Blow FUSE

Remote Trigger: Female 2 circuit jack, 12 VDC @ 400 ma., On when power is on.

Dual Preamp Outputs: Connect to inputs of power amp or powered subwoofer

Tape Out: Constant output of selected input signal for recording, independent of volume control setting.

Tape In: This is the tape monitor selected input. For use with recording devices that employ a monitor system to hear the actual recorded signal. May also be used as an additional line input or an input for an equalizer or other signal adapting device.

CD, Aux1, Aux2 and Tuner: These are inputs requiring line level inputs from source components. These inputs have wide bandwidth, flat frequency response.

Image 4
Contents Page Page Specifications SLP-308 Stereo Tube Preamplifier Front Panel FeaturesRear Apron Features SLP-308 Placement Warranty CardPower Requirements Power Switch Volume ControlInterconnect Cables OperationSelector Switch Factory ServiceSpecial Note

SLP-308 specifications

Cary Audio Design has long been a name synonymous with high-quality audio equipment, and the SLP-308 is a prime example of their commitment to excellence. This line-stage preamplifier is designed to offer superior sound reproduction, making it a favorite among audiophiles and music enthusiasts.

At the heart of the SLP-308 is its all-tube design, which delivers a warm, organic sound that digital amplification often struggles to replicate. The preamp utilizes high-quality vacuum tubes known for their rich harmonic content and natural tonal balance. This results in a listening experience that feels both engaging and lifelike, allowing users to connect more deeply with their music.

One of the standout features of the SLP-308 is its fully balanced circuitry. This design minimizes noise and distortion, ensuring a clean signal path from your source component to the amplifier. The balanced topology not only improves the overall performance but also increases the versatility of the preamp, enabling seamless integration into a variety of audio systems.

The SLP-308 is equipped with both balanced XLR and single-ended RCA inputs and outputs, accommodating a wide range of audio components. This flexibility is essential for audiophiles who wish to optimize their systems with different sources and amplifiers.

In addition to its stellar sonic capabilities, the Cary SLP-308 boasts a user-friendly interface. The front panel features an easy-to-read display and intuitive controls, making it simple to navigate input selection and volume adjustments. The remote control functionality enhances convenience, allowing users to operate the preamp from their listening position.

Another important aspect of the SLP-308 is its power supply. The preamp features an external power supply, which not only isolates sensitive audio circuitry from noise generated by AC power but also enhances performance and reliability. This thoughtful engineering approach is a testament to Cary Audio's attention to detail in crafting high-fidelity components.

With its robust build quality and exquisite aesthetics, the Cary SLP-308 is designed to perform reliably for years. Its classic look, combined with modern technology, ensures that it will fit seamlessly into any high-end audio setup while providing the auditory pleasure that Cary Audio is known for.

In conclusion, the Cary Audio Design SLP-308 line-stage preamplifier stands out as an exceptional choice for those seeking a premium audio experience. Its all-tube design, balanced circuitry, flexibility, ease of use, and superior build quality make it a cornerstone product in any serious audiophile's collection.