Front Panel Features

SPECIFICATIONS: SLP-308 Stereo Tube Preamplifier

Dimensions: 17 1/8” W x 4 _” H x 14” D (~ 44 cm x 11.4 cm x 35.5 cm)

Weight: 15 lb. ( 6.8 kg)

Circuit: Class A Triode

Frequency Response: 9 Hz - 140 kHz + 0, - 3 dB

THD @ rated output: 0.02% (750 mV rated output, 12 volts maximum)

Input Impedance: 100,000 ohms resistive (100 K Ω)

Output Impedance: 440 ohms ( 440 Ω)

Gain: 12 dB

Signal/Noise Level: -88 dB

Resistors: 1 % metal film

Capacitors: Film and foil output caps, 5 micro farad (5 μFd)

Power Transformer: 200% continuous commercial duty cycle

Tubes: 2- 12AU7 dual triodes

Power Supply: Full wave rectification, center-tapped, pi-network with filter choke, fully regulated

AC Power Requirements: 100 – 130 volts AC / 50-60 Hz at 24 watts 200 – 245 volts AC / 50-60 Hz at 24 watts

Internal Wiring: EE Teflon dielectric Silver wire

Warm-up Time: 5 minutes (1 minute auto mute)

Input and Output Jacks: Gold plated with Teflon dielectric inserts

Duty Cycle: Continuous duty 24 hours per day

This section describes the basic specifications of the SLP-308 at the time of printing. Specifications are subject to change or improvement without notice or obligation.

SLP-308 specifications

Cary Audio Design has long been a name synonymous with high-quality audio equipment, and the SLP-308 is a prime example of their commitment to excellence. This line-stage preamplifier is designed to offer superior sound reproduction, making it a favorite among audiophiles and music enthusiasts.

At the heart of the SLP-308 is its all-tube design, which delivers a warm, organic sound that digital amplification often struggles to replicate. The preamp utilizes high-quality vacuum tubes known for their rich harmonic content and natural tonal balance. This results in a listening experience that feels both engaging and lifelike, allowing users to connect more deeply with their music.

One of the standout features of the SLP-308 is its fully balanced circuitry. This design minimizes noise and distortion, ensuring a clean signal path from your source component to the amplifier. The balanced topology not only improves the overall performance but also increases the versatility of the preamp, enabling seamless integration into a variety of audio systems.

The SLP-308 is equipped with both balanced XLR and single-ended RCA inputs and outputs, accommodating a wide range of audio components. This flexibility is essential for audiophiles who wish to optimize their systems with different sources and amplifiers.

In addition to its stellar sonic capabilities, the Cary SLP-308 boasts a user-friendly interface. The front panel features an easy-to-read display and intuitive controls, making it simple to navigate input selection and volume adjustments. The remote control functionality enhances convenience, allowing users to operate the preamp from their listening position.

Another important aspect of the SLP-308 is its power supply. The preamp features an external power supply, which not only isolates sensitive audio circuitry from noise generated by AC power but also enhances performance and reliability. This thoughtful engineering approach is a testament to Cary Audio's attention to detail in crafting high-fidelity components.

With its robust build quality and exquisite aesthetics, the Cary SLP-308 is designed to perform reliably for years. Its classic look, combined with modern technology, ensures that it will fit seamlessly into any high-end audio setup while providing the auditory pleasure that Cary Audio is known for.

In conclusion, the Cary Audio Design SLP-308 line-stage preamplifier stands out as an exceptional choice for those seeking a premium audio experience. Its all-tube design, balanced circuitry, flexibility, ease of use, and superior build quality make it a cornerstone product in any serious audiophile's collection.