Maretron NBE100 Installation, Quick Install, Unpacking the Box, Choosing a Mounting Location

Page 6
1.4 Quick Install

NBE100 User's Manual

1.4 Quick Install

Installing the Maretron NBE100 involves the following five steps. Please refer to the individual sections for additional details.

1.Unpack the box (Section 2.1)

2.Choose a mounting location (Section 2.2)

3.Mount the NBE100 (Section 2.3)

4.Connect the NBE100 (Section 2.4)

2 Installation

2.1 Unpacking the Box

When unpacking the box containing the Maretron NBE100, you should find the following items:

1 – NBE100 – Network Bus Extender

1 – Parts Bag containing 4 Stainless Steel Mounting Screws 1 – NBE100 User’s Manual

1 – Warranty Registration Card

If any of these items are missing or damaged, please contact Maretron.

2.2 Choosing a Mounting Location

Please consider the following when choosing a mounting location.

1.The NBE100 is waterproof, so it can be mounted in a damp or dry location.

2.The orientation is not important, so the NBE100 can be mounted on a horizontal deck, vertical bulkhead, or upside down if desired.

3.The NBE100 is temperature-rated to 55°C (130°F), so it should be mounted away from engines or engine rooms where the operating temperature exceeds the specified limit.

Page 2

Revision 1.0

Image 6
Contents Revision Copyright 2011 Maretron, LLP All Rights Reserved RevisionPage Maretron, LLP 9014 N. 23rd Ave #10Page Revision HistoryNBE100 Users Manual RevisionTable of Contents Table of FiguresThis page intentionally left blank 1 Introduction 1.2 NBE100 Features1.3 NBE100 Accessories 1.1 Firmware Revision2.1 Unpacking the Box 2 Installation1.4 Quick Install 2.2 Choosing a Mounting Location2.4.1 NMEA 2000 Connection 2.4 Connecting the NBE1002.3 Mounting the NBE100 Figure 1 - Mounting the NBE100Figure 2 - NMEA 2000 Connector Face Views 2.4.2 Checking Connections 2.5 Configuring the NBE100Figure 3 - NBE100 Connection Diagram 2.5.1 Device Instance2.5.3 Advanced Configuration… 3 Maintenance4 Troubleshooting 2.5.3.1 Restore Factory DefaultsNMEA 2000 Parameter Group Numbers PGNs 5 Technical SpecificationsCertifications Electrical6 Technical Support Environmentalsupport@maretron.com 7 Installation Template Figure 4 - Mounting Surface Template8 Maretron 2 Year Limited Warranty Warranty Return Procedure