Problem |
| Solution |
|
|
|
The telephone doesn’t ring. | 1 | Make sure the ringer is turned on. |
| 2 | Set the ringer volume to a higher level. |
| 3 | Place a test call from another extension to your extension. |
| 4 | Test the ringer by pressing the left or right side of the Volume |
|
| button while the handset is |
| 5 | Check the line cord to make certain it is securely connected at |
|
| both ends. |
| 6 | If there is still a problem, see your system manager. |
|
|
|
The lights do not go on | 1 | Do a |
next to the buttons. | 2 | Check the line cord to make certain it is securely connected at |
| ||
|
| both ends. |
| 3 | If there is still a problem, see your system manager. |
|
|
|
System 75 Version Notes
If you have Version 1 or 2 of System 75, some features may work a little differently than noted in this guide. The following list explains the slight differences in these procedures.
Note: If you are uncertain what version of the System 75 software your business is using, check with your system manager.
Feature | System 75 Version | Changes in Feature Operation |
|
|
|
Abbreviated | If you are using | You can store up to 16 digits rather than |
Dialing | Version 1 | 24 digits. |
| If you are using | You cannot use an |
| Version 1 or 2 | Enhanced List. |
|
|
|
Call Forwarding | If you are using | You cannot forward |
All Calls | Version 1 or 2 | someone else’s calls. |
|
|
|
Last Number | If you are using | You can store up to 16 digits rather than |
Dialed | Version 1 | 24 digits. |
|
|
|
Priority Calling | If you are using | You cannot change a regular call into a |
| Version 1 or 2 | priority call. |
|
|
|
25