Vizio VSB205 quick start Specifications

Page 13

high voltages, electric shock, and other hazards. If repair is required, contact your dealer and refer all servicing to qualified service personnel.

Keep your Sound Bar away from moisture. Do not expose your Sound Bar to rain or moisture. If water penetrates into your Sound Bar, unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock.

Do not use your Sound Bar if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to repair your Sound Bar yourself.

Avoid using dropped or damaged appliances. If your Sound

Bar is dropped and the housing is damaged, the internal components may function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of your Sound Bar may cause fire or electric shock.

Do not install your Sound Bar in an area with heavy dust or high humidity. Operating your Sound Bar in environments with heavy dust or high humidity may cause fire or electric shock.

Ensure that the power cord and any other cables are unplugged before moving your Sound Bar.

When unplugging your Sound Bar, hold the power plug, not the cord. Pulling on the power cord may damage the wires inside the cord and cause fire or electric shock. When your

Sound Bar will not be used for an extended period of time, unplug the power cord.

To reduce risk of electric shock, do not touch the connector with wet hands.

Insert the remote control battery in accordance with instructions. Incorrect polarity may cause the battery to leak which can damage the remote control or injure the operator.

If any of the following occurs, contact the dealer:

-The power cord fails or frays

-Liquid sprays or any object drops into your Sound Bar

-Sound Bar is exposed to rain or other moisture

-Sound Bar is dropped or damaged in any way

-The performance of your Sound Bar changes substantially

SPECIFICATIONS

Sound Bar: Four 2.75” High-Efficiency

Hand-Built Full Range Transducers

Inputs: 1 x 3.5mm Audio

1 x RCA Stereo Audio

Sound Pressure

Level: 98 dB

Frequency

Response: 90Hz - 19 KHz Voltage: 100-240 VAC, 50-60 Hz

Dimensions: 31.50” x 3.98” x 2.75” (with stand) 31.50” x 3.20” x 2.75” (w/o stand)

Net Weight: 4.76 lbs (with stand)

4.10lbs (w/o stand)

Gross Weight: 6.98 lbs

Compliances: UL, FCC

11

Image 13
Contents Home Theater Sound BAR Table of Contents Package Contents TOP Controls & ConnectionsFIRST-TIME Setup Input Power SRS Using the RemoteWall Mounting the Sound BAR Vizio Recommends Troubleshooting and Technical Support Important Safety Instructions Specifications On Parts and Labor ONE-YEAR Limited WarrantyLegal & Compliance 110215ST-NC