Lexmark Comprehensive Guide to IP Setup Utility and Driver for Printers

Understanding the printer menus 67

Network Card menu

To access the menu, navigate to either of the following:

•Network/Ports > Standard Network > Standard Network Setup > Network Card

•Network/Ports > Network [x] > Network [x] Setup > Network Card

Use	To
View Card Status	View the connection status of the network card.
Connected
Disconnected
View Card Speed	View the speed of an active network card.
Network Address	View the network addresses.
UAA
LAA
Job Timeout	Set the amount of time it takes for a network print job to be canceled.
0–255 seconds	Notes:
	• 90 seconds is the factory default setting.
	• A setting value of 0 disables the timeout.
	• If a value of 1–9 is selected, then the setting is saved as 10.

TCP/IP menu

To access the menu, navigate to any of the following:

•Network/Ports > Standard Network > Standard Network Setup > TCP/IP

•Network/Ports > Network [x] > Network [x] Setup > TCP/IP

Note: This menu is available only in network printers or printers connected to print servers.

Use	To
Set Hostname	Set the host name.
	Notes:
	• This setting can be changed only from the Embedded Web Server.
	• The host name can be up to 15 characters and can be a US‑ASCII or
	alphanumeric character, or hyphen.
IP Address	View or change the current TCP/IP address.
	Note: Manually setting the IP address sets the “Enable DHCP” and “Enable Auto IP”
	settings to Off. It also sets “Enable BOOTP” and “Enable RARP” to Off on systems
	that support BOOTP and RARP.
Netmask	View or change the current TCP/IP netmask.
Gateway	View or change the current TCP/IP gateway.
Enable DHCP	Specify the DHCP address and parameter assignment.
On	Note: On is the factory default setting.
Off