Lexmark 35S0200, 35S0150, MS410DN manual Set Date and Time menu

Understanding the printer menus		73
	Use	To
	Configure Log	Specify how and whether or not audit logs are created.
	Enable Audit	Notes:
	Yes
		• Enable Audit determines if events are recorded in the secure audit log and
	No
		remote syslog. No is the factory default setting.
	Enable Remote Syslog
		• Enable Remote Syslog determines if logs are sent to a remote server. No is the
	No
		factory default setting.
	Yes
		• Remote Syslog Facility determines the value used to send logs to the remote
	Remote Syslog Facility
		syslog server. 4 is the factory default setting.
	0–23
		• If the security audit log is activated, then the severity value of each event is
	Severity of events to log
		recorded. 4 is the factory default setting.
	0–7
Set Date and Time menu
	Use	To
	Current Date and Time	View the current date and time settings for the printer.
		Note: The date and time are set in YYYY‑MM‑DD HH:MM format.
	Manually Set Date and Time	Enter the date and time.
	[input date/time]	Note: Setting the date and time using this menu automatically sets Enable NTP to
		Off.
	Time Zone	Select the time zone.
	[list of time zones]	Note: GMT is the factory default setting.
	Automatically observe DST	Set the printer to use the applicable daylight saving time (DST) start and end times
	On	associated with the printer Time Zone setting.
	Off	Note: On is the factory default setting.
	Enable NTP	Enable Network Time Protocol, which synchronizes the clocks of devices on a
	On	network.
	Off	Notes:
		• On is the factory default setting.
		• Enable NTP is automatically set to Off if you manually set the date and time.