Safety information | Lexmark 35S0150, 35S0200, MS410DN manual

Safety information

Connect the power cord to a properly grounded electrical outlet that is near the product and easily accessible.

Do not place or use this product near water or wet locations.

CAUTION—POTENTIAL INJURY: This product uses a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

This product uses a printing process that heats the print media, and the heat may cause the media to release emissions. You must understand the section in your operating instructions that discusses the guidelines for selecting print media to avoid the possibility of harmful emissions.

CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching.

CAUTION—POTENTIAL INJURY: The lithium battery in this product is not intended to be replaced. There is a danger of explosion if a lithium battery is incorrectly replaced. Do not recharge, disassemble, or incinerate a lithium battery. Discard used lithium batteries according to the manufacturer's instructions and local regulations.

CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or printer damage:

•Turn the printer off using the power switch, and then unplug the power cord from the electrical outlet.

•Disconnect all cords and cables from the printer before moving it.

•If an optional tray is installed, then remove it from the printer. To remove the optional tray, slide the latch on the right side of the tray toward the front of the tray until it clicks into place.

•Use the handholds located on both sides of the printer to lift it.

•Make sure your fingers are not under the printer when you set it down.

•Before setting up the printer, make sure there is adequate clearance around it.

Use only the power cord provided with this product or the manufacturer's authorized replacement.

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

CAUTION—SHOCK HAZARD: Make sure that all external connections (such as Ethernet and telephone system connections) are properly installed in their marked plug-in ports.

This product is designed, tested, and approved to meet strict global safety standards with the use of specific manufacturer's components. The safety features of some parts may not always be obvious. The manufacturer is not responsible for the use of other replacement parts.

CAUTION—POTENTIAL INJURY: Do not cut, twist, bind, crush, or place heavy objects on the power cord. Do not subject the power cord to abrasion or stress. Do not pinch the power cord between objects such as furniture and walls. If any of these things happen, a risk of fire or electrical shock results. Inspect the power cord regularly for signs of such problems. Remove the power cord from the electrical outlet before inspecting it.

Refer service or repairs, other than those described in the user documentation, to a service representative.

CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock when cleaning the exterior of the printer, unplug the power cord from the electrical outlet and disconnect all cables from the printer before proceeding.

35S0150, MS410, MS410D, 35S0200, MS410DN specifications

The Lexmark MS410DN is a versatile and efficient monochrome laser printer designed for small to medium-sized workgroups that demand reliable performance and high-quality output. Engineered with cutting-edge technologies, the MS410DN is a strong contender in the competitive printer market, making it an excellent choice for businesses focused on productivity and cost-effectiveness.

At the heart of the Lexmark MS410DN lies its impressive print speed, which can reach up to 40 pages per minute, allowing users to complete large print jobs quickly without compromising quality. The first page is delivered in as little as 6.5 seconds from sleep mode, ensuring minimal waiting time. With a print resolution of up to 1200 x 1200 dpi, the printer produces sharp text and detailed graphics, making it ideal for professional documents.

One of the standout features of the Lexmark MS410DN is its automatic duplex printing capability, which helps reduce paper waste and lowers overall printing costs. This feature allows users to print on both sides of the page effortlessly, contributing to more efficient document management.

The printer is equipped with a 250-sheet input tray, reducing the need for frequent paper replenishment, and it supports a variety of media types and sizes, including envelopes and labels. Additionally, the Lexmark MS410DN supports a monthly duty cycle of up to 60,000 pages, making it suitable for heavy usage environments.

In terms of connectivity, the MS410DN offers USB, Ethernet, and optional wireless capabilities, providing flexibility in how the printer is integrated into existing workflows. Users can also take advantage of Lexmark’s EasySetup feature, which simplifies printer installation and management.

Security is another critical area where the Lexmark MS410DN excels. It includes features such as secure printing, which requires user authentication at the printer before jobs are released, thus protecting sensitive information.

The software suite that accompanies the printer enhances operational efficiency, offering tools for document management and print monitoring. The Lexmark MS410DN also supports various mobile printing options, enabling users to print directly from smartphones and tablets.

In summary, the Lexmark MS410DN is a robust, feature-rich monochrome laser printer that combines speed, quality, and efficiency. With advanced technologies and a focus on security, it stands out as an ideal choice for businesses looking to enhance productivity while managing operating costs effectively.