Lucent Technologies 7820-0766-004 Configuring the dnsrelay command, Configuring the ipoa command

Page 39

Configuring a 20 Series CellPipe

Configuring the dnsrelay command

Select the setwanip command to set PVC and the IP address for routing.

>r1483> setwanip [<vpi>/]<vci> <wanip[/<masknum>]>

Select the show command to display the RFC1483 configuration.

> r1483> show

RFC1483 setting:

FUNCTION VPI/VCI

CLASS Wan IP/MaskNum

Configuring the dnsrelay command

The following is a list of menus available under the dnsrelay command:

setdnsip	-	set DNS Server	IP
show	-	show DNS Relay	configuration

Select the setdnsip command to set the IP address of the DNS server.

>dnsrelay> setdnsip <dnsip> [<retry times>]

Select the show command to display the DNS Relay configuration.

>dnsrelay> show

DNS server ip: 192.168.2.65

Retry times: 3

DNS relay status

Configuring the ipoa command

The following is a list of menus available under the ipoa command>

delwanip	- delete IPoA PVC
setqos	- set class
setrip	- set IPoA		PVC
setwanip	-	set IPoA	PVC
show	-	show IPoA configuration

Select the delwanip command to delete one or all (8) IPoA PVCs.

>ipoa> delpvc <all>[<vpi>/]<vci>

CellPipe™ 20 Series User’s Guide

4-13

Image 39

Contents CellPipe 20 Series Lucent Technologies Obtaining technical assistance Customer ServiceCustomer Service Finding information and softwareCustomer Service Contents Upgrading System Software About this guide IntroductionWhat is the CellPipe 20 Series Product Family? What is the CellPipe 20 Series Product Family?Lucent TURN-UP CellPipe 20 Series managementLucent TURN-UP Page Verifying package contents SetupItems you need for installation Connecting CellPipe 20 Series productsItems you need for installation CellPipe 20 Series rear panels Connecting CellPipe 20 Series productsConsole setup Checking status lightsChecking status lights Console setup Page Syntax of command-line interface Command-Line InterfaceViewing the main menu Using the commandsDisplaying information about a command Using the commandsBridging commands Bridging commandsDisplaying second-level commands Saving configurationsMain menu Second-level menus/description Set all configuration to factory setting Routing commands Routing commandsAdditional main-menu and second-level routing commands Command-Line Interface Command-Line Interface Page Auto-provisioning Configuring a 20 Series CellPipeConfiguring WAN interface Sdsl commands and configurationsConfiguring WAN interface Select the dbit command to configure the sdsl data bit Adsl commands and configurations Select the abort command to abort the Adsl connection Multimode Configuring LAN interface Configuring LAN interface in bridging modeConfiguring LAN interface Configuring LAN interface in routing mode Configuring the manage command Configuring the mode commandConfiguring the manage command Configuring the quick command Configuring the quick command Quick command in bridging mode Quick command in routing modeConfiguring the r1483 command R1483 command in bridging modeConfiguring the r1483 command R1483 command in routing mode Configuring the dnsrelay command Configuring the ipoa commandConfiguring the dnsrelay command Configuring the pppoa command Configuring the pppoa commandConfiguring the pat command Configuring the pat commandSelect the show command to display the Pat configuration Preparing to upgrade Upgrading System SoftwareObtaining software Upgrading software Upgrading softwareWarranties and FCC Regulations Product warrantyFCC Part 15 Notice Warranty repairOut-of warranty repair FCC Part 15 NoticeIC CS-03 Notice IC CS-03 Notice