LevelOne IFE-0501, IFE-0502 user manual Cabling

Page 11

Cabling

„Twisted-pair segment can be connected with unshielded twisted pair (UTP) or shielded twisted pair (STP) cable. The cable must comply with the IEEE 802.3u 100Base TX standard for Category 5. The cable between the converter and the link partner (switch, hub, workstation, etc.) must be less than 100 meters (328 ft.) long.

„Fiber segment using single-mode connector type must use 9/125µm single-mode fiber cable.

„Fiber segment using multi-mode connector type must use 50 or 62.5/125 µm multi-mode fiber cable.

11

Image 11
Contents LevelOne FCC Warning Content Introduction FeaturesPackage Contents Front Panel Physical DimensionHardware Description Top View Color Description LED IndicatorsPin Number Assignment Pin MDI-X Signal Name MDI Signal NamePorts Page Cabling Wiring the Power Inputs Wiring the Fault Alarm Contact DIN-Rail Mounting Mounting InstallationPage Wall Mount Plate Mounting Installation Steps Hardware InstallationNetwork Application Troubleshooting Technical Specification Temperature Case Dimension Power SupplyPower Consumption Installation