LevelOne WAP-0005 Using WPA-802.1x, Wireless Station Configuration, Radius Server Configuration

Page 40

PC and Server Configuration

Using WPA-802.1x

This is the most secure and most complex system.

802.1x mode provides greater security and centralized management, but it is more complex to configure.

Wireless Station Configuration

For each of the following items, each Wireless Station must have the same settings as the Wireless Access Point.

Mode

On each PC, the mode must be set to Infrastructure.

 

 

SSID (ESSID)

This must match the value used on the Wireless Access Point.

 

The default value is wireless

 

Note! The SSID is case sensitive.

 

 

802.1x

Each client must obtain a Certificate which is used for authentication for

Authentication

the Radius Server.

 

 

802.1x

Typically, EAP-TLS is used. This is a dynamic key system, so keys do

Encryption

NOT have to be entered on each Wireless station.

 

 

Radius Server Configuration

If using WPA-802.1xmode, the Radius Server on your network must be configured as follow:

It must provide and accept Certificates for user authentication.

There must be a Client Login for the Wireless Access Point itself.

The Wireless Access Point will use its Default Name as its Client Login name.

The Shared Key, set on the Security Screen of the Access Point, must match the Shared Secret value on the Radius Server.

Encryption settings must be correct.

37

Image 40
Contents LevelOne Table of Contents Wireless Access Point Overview General ProblemsOverview Wireless LAN Terminology Overview Command ReferenceFeatures of your Wireless Access Point IntroductionSecurity Features Advanced FeaturesPackage Contents Physical DetailsTo Clear All Data and restore the factory default values Power portRear Panel EthernetInstallation ProcedureRequirements RequirementsUsing PoE Power over Ethernet Using PoE Power over EthernetAccess Point Setup Setup using the Windows UtilityInstallation OverviewWireless Access Points ButtonsSetup Procedure Wireless Security Wireless SecuritySetup using a Web Browser Password DialogIf you cant connect System Access Control WirelessManagement Status Screen System Screen Data System ScreenIdentification IP AddressData Access Control Screen Access ControlTelnet Data Trusted Wireless Stations Trusted Wireless StationsButtons Select All Select NoneEdit AddWireless Screens Basic Settings ScreenData Basic Settings Screen Wireless ModeChannel No Remote APCurrent Channel Broadcast Ssid Security Settings Radius MAC Authentication Security Settings NoneUsing MAC authentication Radius-based MAC authentication Screen Data Radius-based MAC Authentication ScreenUAM authentication Internal UAM authentication ExternalAuthentication UAM ScreenData UAM Screen InternalSecurity Settings WEP Data WEP ScreenKey Input Key ValuePassphrase Radius MACSecurity Settings WPA-PSK Data WPA-PSK ScreenNetwork Key WPA EncryptionPairwise Key Update Group Key UpdateUpdate Group key when any membership terminates Key LifetimeData WPA-802.1x Screen Security Settings WPA-802.1xWPA-802.1x Update Update Group keyWhen any member Update ReportSecurity Settings Data 802.1x Screen802.1x Radius Server AddressWEP Key Size Update Report everyKey Exchange Advanced Settings Data Advanced Settings ScreenBasic Rate OptionsParameters 802.11b 2.4GHz onlyPC and Server Configuration Using WEPMode SecurityUsing WPA-PSK Using WPA-802.1x Wireless Station ConfigurationRadius Server Configuration 802.1xWindows 2000 Domain Controller Setup 802.1x Server Setup Windows 2000 ServerServices Installation Components Screen Dhcp server configuration CA ScreenIP Address Screen Certificate Authority Setup Certificate Authority ScreenActive Directory Screen Group Policy Screen Internet Authentication Service Radius Setup Service ScreenAuthentication Screen Remote Access Login for Users Dial-in Screen802.1x Client Setup on Windows XP Client Certificate SetupWireless CA Screen Identifying Information Screen 802.1x Authentication Setup Encryption SettingsWireless Networks Screen Enabling EncryptionProperties Screen Using 802.1x Mode without WPA Operation Operation and StatusStatus Screen Access Point WirelessData Status Screen SecurityData Activity Log Activity LogData Data Station List Screen Station ListStation List 4GHz Wireless Statistics ScreenData Statistics Screen System Up TimeControl Admin Login Screen Other Settings & FeaturesData Admin Login Screen Password Dialog Config File Data Config File ScreenBackup RestoreData Snmp Screen GeneralManagers TrapsFirmware Upgrade To perform the Firmware UpgradeSpecifications Wireless Access PointHardware Specifications Wireless SpecificationsSoftware Specifications Feature DetailsMessage Log FCC Statement FCC Radiation Exposure StatementGeneral Problems TroubleshootingTo Find the Access Points IP Address Appendix B Troubleshooting Windows TCP/IP Checking TCP/IP Settings Windows 9x/MENormally, no changes need to be made Using Dhcp Using Specify an IP AddressChecking TCP/IP Settings Windows NT4.0 Windows NT4.0 TCP/IPObtain an IP address from a Dhcp Server Checking TCP/IP Settings Windows Network Configuration WinUsing a fixed IP Address Use the following IP Address Checking TCP/IP Settings Windows XP Network Configuration Windows XPUsing Dhcp About Wireless LANs Wireless LAN TerminologyAd-hoc Mode Infrastructure ModeChannels WPA-802.1x802.1x Using the CLI Telnet Command Line InterfaceUsing the CLI Serial Port Command Reference CLI Port SettingsAppendix E Command Line Interface Wireless Access Point User Guide Appendix E Command Line Interface Wireless Access Point User Guide Set Extended Channel Mode Wireless Access Point User Guide Set wep -- Set Encryption Mode
Related manuals
Manual 108 pages 28.18 Kb