Lancom Systems 3550 manual Firewall wizard, Wizard for WEBconfig

Page 62

EN

LANCOM 3550 Wireless

Chapter 7: Security settings

￿Now you can set the security settings for the WLAN. These include the name of the wireless network, the closed network function and the WEP encryption. You can type in the parameters for both wireless networks separately on devices with the option of a second WLAN interface.

￿Now you specify filter lists for stations (ACL) accessing the WLAN and pro- tocols. Thereby, you restrict data exchange between the wireless network and the local network.

￿Now activate Stateful Inspection, ping-blocking and Stealth mode in the the firewall configuration.

￿The wizard will inform you when entries are complete. Complete the con- figuration with Finish.

7.3.2Wizard for WEBconfig

Under WEBconfig you have the possibility to run the wizard Security settings to control and change the settings. The following values are handled:

password for the device

allowed protocols for the configuration access of local and remote net- works

parameters of configuration lock (number of failed log-in attempts and duration of the lock)

security parameters as WLAN name, closed network function, WEP key, ACL list and protocol filters

7.4The firewall wizard

The LANCOM Router incorporates an effective protection of your WLAN when accessing the Internet by its Stateful Inspection firewall and its firewall filters. Basic idea of the Stateful Inspection firewall is that only self-initiated data transfer is considered allowable. All unasked accesses, which were not initi- ated from the local network, are inadmissible.

The firewall wizard assists you to create new firewall rules quickly and com- fortably.

Please find further information about the firewall of your LANCOM Router and about its configuration in the reference manual.

62

Page 61 Page 63
Image 62
Page 61 Page 63
Contents Lancom 3550 Wireless Lancom Systems GmbH, Wuerselen Germany. All rights reserved Security settings Thank you for placing your trust in this Lancom productFurther server services DHCP, DNS, charge management This documentation was compiled … Important instruction that should be followed Contents Point-to-point connections Setting up Internet accessSetting up the Umts profile Radio channel regulations for WLANs Options and accessoriesAppendix Introduction What is a Wireless LAN?Operation modes of Wireless LANs and base stations Which hardware to use?Advantages of the UMTS/HSPDA solution Last mile via UMTS/HSPDAMobile conference room InternetUMTS/HSPDA Backup Internet connection over DSL What can your Lancom Router do? ApplicationsWireless LAN Lancom System preconditions InstallationPackage contents Meanings of the LEDs Status displays, interfaces an hardware installationStatus display Front sideLED remains lit green Green Red Blinking Time or connect-charge reachedNal wireless network card is not indicated on this display Flashing Power-LED but no connection?Expert Configuration Setup Charges-module Wireless link display can assume four different conditionsBack of the unit Hardware installation Software installation Plexity considerably Starting Lancom setup Which software should you install?Installation Which information is necessary? Basic configuration1 TCP/IP settings Information required for manual TCP/IP configuration New LAN-fully automatic configuration possibleConfigure manually nevertheless? Configuration protection Settings for the Wireless LANSelection of a radio channel Settings for the DSL connectionConnect charge protection Start up LANconfig by clicking Start Programs Lancom LANconfigInstructions for WEBconfig Complete the configuration with FinishNetwork without Dhcp server Network with Dhcp serverOr with a name as discribed above Starting the wizards in WEBconfigWEBconfig main menu will be displayed Basic configuration TCP/IP settings to workstation PCs Entering the password in the web browserManual IP address assignment IP address assignment via the Lancom Router defaultIP address assignment via a separate Dhcp server Setting up Internet access LANconfig Quick access to the setup wizards Instructions for LANconfigBar, select Tools Setup Wizard Setting up Internet access Setting up the Umts profile Internet accessSetting up the Umts profile Setting up the Umts profile VPN site coupling Setting up the Umts profile Other settings Choosing the mobile telephone networkActivate UMTS/GPRS profile UMTS/HSPDA only or automatic UMTS/HSPDA/GPRS selection Set up a time limit Point-to-point connections Configuration with LANconfig Configuration tool Menu/Table Encryption with 802.11i/WPA Access points in relay modeSecurity for point-to-point connections Connections under the following pathsConfiguration area Wlan Security on the 802.11i/WEP tab Found under WEBconfig or Telnet under the following paths Leps for P2P connectionsClosed network Security settingsSecurity for the Wireless LAN Access control via MAC address Lancom Enhanced Passphrase SecurityEncryption of the data transfer  ensure that you have a secure connection 5 802.1x / EAPStandard WEP encryption Tips for handling keys IPSec over WlanMand bar Extras Setup Wizard Security settings wizardWizard for LANconfig Wizard for WEBconfig Firewall wizardRules Security checklistConfiguration under WEBconfig Have you assigned a password to the Snmp configuration? Have you assigned a password for the configuration?Have you permitted remote configuration? Have you activated the Firewall?Have you activated the IP masquerading? Have you closed critical ports with filters?Security settings Security settings Antenna Diversity Options and accessoriesOptional Lancom Wireless Router antennas Installation of AirLancer Extender antennas Lancom Public Spot OptionRadius Troubleshooting PIN HandlingMenü/Tabelle Has the correct transfer protocol been selected? Problems with the cabling?You can monitor and correct the protocol settings under Increasing the TCP/IP window size under Windows DSL data transfer is slowUnwanted connections under Windows XP Performance data and specifications AppendixWAN interface, 10/100base-TX Contact assignmentLAN interface, 10/100base-TX Declaration of conformity Radio channel regulations for WLANs Numerics Relay function Remote configuration Reset Connector cable LAN connectionNode/hub switch Optional antennas Options and accessories LAN Link LAN Rx/Tx Power WAN Link WAN Status Wireless LinkPIN handling Time limit WAN connector WEBconfig PasswordWork Incorrect PIN 15, 59

3550 specifications

The Lancom Systems 3550 is a robust and versatile router designed to meet the demanding connectivity needs of modern networking environments. It is particularly well-suited for enterprises seeking to enhance their network performance, reliability, and security. This device combines advanced features with cutting-edge technologies to provide a comprehensive networking solution.

One of the standout features of the Lancom Systems 3550 is its support for various WAN technologies. It supports fiber, DSL, and LTE connections, ensuring seamless internet access regardless of the available infrastructure. This versatility allows businesses to choose the optimal connection type for their specific needs and easily adapt to changing circumstances.

In terms of voice and data capabilities, the 3550 is equipped with integrated VoIP functionality. This feature enables companies to implement Voice over IP solutions, reducing telecommunication costs while improving call quality. The router supports multiple concurrent voice channels, making it an ideal choice for businesses with significant communication requirements.

Security is paramount in today’s digital landscape, and the Lancom Systems 3550 does not disappoint. It includes advanced firewall features and supports VPN technologies, enabling secure remote access for employees and partners alike. With support for SSL and IPSec VPNs, businesses can ensure that sensitive data remains protected, regardless of whether employees are working in the office or remotely.

Another significant characteristic of the 3550 is its high-performance capabilities. It is designed to handle a high volume of data traffic without compromising performance. Equipped with advanced traffic management tools, the router can prioritize essential services, ensuring that critical applications receive the bandwidth they need, even during peak usage times.

Additionally, the device offers robust monitoring and management features. Network administrators can utilize SNMP, Syslog, and other management protocols to gain real-time insights into performance metrics and troubleshoot issues proactively. The intuitive user interface simplifies configuration and management, allowing IT staff to focus on other pressing tasks.

Scalability is also a key advantage of the Lancom Systems 3550. It provides options for expansion and can be integrated seamlessly with other devices in the Lancom ecosystem. This flexibility allows organizations to grow their networks without the need for significant overhauls.

In summary, the Lancom Systems 3550 is an ideal solution for organizations looking to enhance their networking capabilities. With its support for multiple WAN technologies, integrated security features, high performance, and robust management tools, it stands out as a reliable choice for modern enterprises. Whether for data communication or voice solutions, the 3550 ensures optimized performance, security, and scalability in one comprehensive package.
Top Page Image Contents