Chapter 4 Using the Enclosure
4.1Connecting the enclosure
Follow these steps to connect your
1.Place your 2.5” hard drive into the enclosure. For more information on setting up the enclosure, see Chapter 3, “Hardware Setup”.
2.Plug the provided USB cable into the PC port in the enclosure. Plug the USB slot into the computer’s USB port.
3.You’ve done everything you need to get your enclosure
4.If your hard drive is new or not partitioned, the system will pop up a warning message to remind you to initialize, partition and format your hard drive with file systems FAT, FAT32 or NTFS.
Note: Some desktop or notebook computers may not be able to run the enclosure properly;
12