LevelOne WBR-5400 user manual Make Correct Network Settings of Your Computer, Ping

Page 11

Chapter3 NetworkSettingsandSoftwareInstallation

To use WBR-5400 correctly, you have to properly configure the network settings of your computers and install the attached setup program into your MS Windows platform (98SE/ME/2000/XP )

3.1 Make Correct Network Settings of Your Computer

The default IP address of this product is 192.168.123.254, and the default subnet mask is 255.255.255.0. These addresses can be changed on your need, but the default values are used in this manual. If the TCP/IP environment of your computer has not yet been configured, you can refer to Appendix A to configure it. For example,

1.configure IP as 192.168.123.1, subnet mask as 255.255.255.0 and gateway as 192.168.123.254, or more easier,

2.configure your computers to load TCP/IP setting automatically, that is, via DHCP server of this product.

After installing the TCP/IP communication protocol, you can use the ping command to check if your computer has successfully connected to this product. The following example shows the ping procedure for Windows 95 platforms. First, execute the ping command

ping 192.168.123.254

If the following messages appear:

Pinging 192.168.123.254 with 32 bytes of data:

Reply from 192.168.123.254: bytes=32 time=2ms TTL=64

a communication link between your computer and this product has been successfully established. Otherwise, if you get the following messages,

Pinging 192.168.123.254 with 32 bytes of data:

Request timed out.

There must be something wrong in your installation procedure. You have to check the following items in sequence:

1.Is the Ethernet cable correctly connected between this product and your computer?

Tip: The LAN LED of this product and the link LED of network card on your computer must be lighted.

2.Is the TCP/IP environment of your computers properly configured?

Tip: If the IP address of this product is 192.168.123.254, the IP address of your computer must be 192.168.123.X and default gateway must be 192.168.123.254.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents LevelOne FCC Interference Statement Specification is subject to change without noticeCopyright TrademarksTable of Contents Page Functions and Features Ieee 802.11b compatible 11M High speed for wireless LAN connectionSPI Mode Supported RoamingPacking List Function Color Status Description Panel LayoutFront Panel Ethernet router Power inletPort where you will connect your cable or DSL modem or Rear Panel Ports DescriptionSetup WAN connection Procedure for Hardware InstallationDecide where to place your Wireless Broadband Router Setup LAN connectionPing Make Correct Network Settings of Your ComputerConfiguringWirelessBroadbandRouter Start-up and Log Status Wizard Press Next Basic Setting Press Change Primary Setup WAN Type, Virtual ComputersPPP over Ethernet Static IP AddressDynamic IP Address Pptp 1.6 L2TP Virtual Computers Dhcp Server Press MoreWireless Setting, and Security Page 802.1X Setting WPA-PSK WPA Page Page Page Page Change Password Forwarding Rules Virtual Server Page Special AP Non-standard FTP port UPnP SettingMiscellaneous Items IP Address of DMZ HostSecurity Settings Packet Filter Example Example Filter field Example Example Domain Filter Example URL Blocking URL Blocking EnablePage MAC Address Control IP Address Control tableMAC Address Discard Ping from WAN side Remote Administrator Host/PortAdministrator Time-out SPI ModeVPN PPTP/IPSec Pass-Through DoS Attack DetectionAdvanced Settings System Time Time Zone Get Date and Time using PC`s Date and TimeGet Date and Time by NTP Protocol Time ServerSystem Log Dynamic DNS New settings will be effective after reboot Get Community Snmp SettingEnable Snmp WAN Access IP AddressExample Routing Table Configuration on NAT Router Destination Press Add New Rule Schedule RulePage Delete After configure Rule Schedule EnableEdit Page Toolbox System Log Firmware Upgrade Reboot Backup SettingReset to default Domain Name or IP address for Ping Test Miscellaneous Items MAC Address for Wake-on-LANInstall TCP/IP Protocol into Your PC AppendixA TCP/IPConfigurationforWindows95/98Set TCP/IP Protocol for Working with NAT Router Don’t input any value in the Gateway tab Page Page Equipment Details ConfigurationDUT and Windows 2000 Radius Server Setup Enable Ieee 802.1X access control Page Certificate information on PC1 Authentication success Restore directly when the router power on Reset to factory Default

WBR-5400 specifications

The LevelOne WBR-5400 is a robust wireless router designed to meet the needs of both home and small office environments. With its efficient and reliable performance, the WBR-5400 stands out as a versatile networking solution, delivering seamless connectivity and impressive features.

One of the key characteristics of the WBR-5400 is its compliance with the IEEE 802.11n standard, which allows for a significant boost in wireless coverage and data transfer speeds. The device can deliver wireless speeds of up to 300 Mbps, ensuring smooth online activities ranging from streaming high-definition content to online gaming. By utilizing multiple antennas and advanced MIMO (Multiple Input Multiple Output) technology, the router optimizes wireless signals, minimizing dead zones and allowing for reliable connections throughout various spaces.

The WBR-5400 also supports both wired and wireless connectivity, featuring four 10/100 Mbps Ethernet ports for users who prefer a stable hardwired connection. This flexibility allows businesses and homes to connect various devices simultaneously, including computers, printers, and smart home devices, providing an efficient networking experience.

Security is paramount in modern networking, and the WBR-5400 incorporates robust encryption protocols, such as WPA and WPA2, to protect sensitive data from unauthorized access. The device also includes a built-in firewall, providing an additional layer of security against potential cyber threats.

Furthermore, the WBR-5400 comes with easy setup and management features. The user-friendly interface assists users in configuring the router settings effortlessly, making it accessible even to those with limited technical knowledge. The router offers features like DHCP server, which assigns IP addresses automatically, and Port Forwarding, allowing specific network traffic to reach designated devices.

In terms of design, the LevelOne WBR-5400 is compact and stylish, perfect for integration into any home or office environment. Its lightweight build makes it easy to install and set up on a shelf or desk.

Overall, the LevelOne WBR-5400 wireless router combines advanced features, secure connections, and user-friendly setup, making it an ideal choice for individuals and small businesses seeking reliable networking solutions. With its combination of performance, security, and convenience, it offers a solid foundation for a seamless online experience.
Top Page Image Contents