LevelOne WBR-5400 user manual

Page 79

Figure 3: Smart card or certificate properties

4. Windows 2000 RADIUS server Authentication testing:

4.1DUT authenticate PC1 using certificate. (PC2 follows the same test procedures.)

1.Download and install the certificate on PC1. (Fig 4)

2.PC1 choose the SSID of DUT as the Access Point.

3.Set authentication type of wireless client and RADIUS server both to EAP_TLS.

4.Disable the wireless connection and enable again.

5.The DUT will send the user's certificate to the RADIUS server, and then send the message of authentication result to PC1. (Fig 5)

6.Windows XP will prompt that the authentication process is success or fail and end the authentication procedure. ( Fig 6)

7.Terminate the test steps when PC1 get dynamic IP and PING remote host successfully.

Image 79

Contents LevelOne FCC Interference Statement Specification is subject to change without noticeCopyright TrademarksTable of Contents Page Functions and Features Ieee 802.11b compatible 11M High speed for wireless LAN connectionSPI Mode Supported RoamingPacking List Front Panel Panel LayoutFunction Color Status Description Ethernet router Power inletPort where you will connect your cable or DSL modem or Rear Panel Ports DescriptionSetup WAN connection Procedure for Hardware InstallationDecide where to place your Wireless Broadband Router Setup LAN connectionPing Make Correct Network Settings of Your ComputerConfiguringWirelessBroadbandRouter Start-up and Log Status Wizard Press Next Basic Setting Press Change Primary Setup WAN Type, Virtual ComputersDynamic IP Address Static IP AddressPPP over Ethernet Pptp 1.6 L2TP Virtual Computers Dhcp Server Press MoreWireless Setting, and Security Page 802.1X Setting WPA-PSK WPA Page Page Page Page Change Password Forwarding Rules Virtual Server Page Special AP Non-standard FTP port UPnP SettingMiscellaneous Items IP Address of DMZ HostSecurity Settings Packet Filter Example Example Filter field Example Example Domain Filter Example URL Blocking URL Blocking EnablePage MAC Address Control MAC Address Control tableIP Address Discard Ping from WAN side Remote Administrator Host/PortAdministrator Time-out SPI ModeVPN PPTP/IPSec Pass-Through DoS Attack DetectionAdvanced Settings System Time Time Zone Get Date and Time using PC`s Date and TimeGet Date and Time by NTP Protocol Time ServerSystem Log Dynamic DNS New settings will be effective after reboot Get Community Snmp SettingEnable Snmp WAN Access IP AddressExample Routing Table Configuration on NAT Router Destination Press Add New Rule Schedule RulePage Edit After configure Rule Schedule EnableDelete Page Toolbox System Log Firmware Upgrade Reset to default Backup SettingReboot Domain Name or IP address for Ping Test Miscellaneous Items MAC Address for Wake-on-LANInstall TCP/IP Protocol into Your PC AppendixA TCP/IPConfigurationforWindows95/98Set TCP/IP Protocol for Working with NAT Router Don’t input any value in the Gateway tab Page Page Equipment Details ConfigurationDUT and Windows 2000 Radius Server Setup Enable Ieee 802.1X access control Page Certificate information on PC1 Authentication success Restore directly when the router power on Reset to factory Default

WBR-5400 specifications

The LevelOne WBR-5400 is a robust wireless router designed to meet the needs of both home and small office environments. With its efficient and reliable performance, the WBR-5400 stands out as a versatile networking solution, delivering seamless connectivity and impressive features.

One of the key characteristics of the WBR-5400 is its compliance with the IEEE 802.11n standard, which allows for a significant boost in wireless coverage and data transfer speeds. The device can deliver wireless speeds of up to 300 Mbps, ensuring smooth online activities ranging from streaming high-definition content to online gaming. By utilizing multiple antennas and advanced MIMO (Multiple Input Multiple Output) technology, the router optimizes wireless signals, minimizing dead zones and allowing for reliable connections throughout various spaces.

The WBR-5400 also supports both wired and wireless connectivity, featuring four 10/100 Mbps Ethernet ports for users who prefer a stable hardwired connection. This flexibility allows businesses and homes to connect various devices simultaneously, including computers, printers, and smart home devices, providing an efficient networking experience.

Security is paramount in modern networking, and the WBR-5400 incorporates robust encryption protocols, such as WPA and WPA2, to protect sensitive data from unauthorized access. The device also includes a built-in firewall, providing an additional layer of security against potential cyber threats.

Furthermore, the WBR-5400 comes with easy setup and management features. The user-friendly interface assists users in configuring the router settings effortlessly, making it accessible even to those with limited technical knowledge. The router offers features like DHCP server, which assigns IP addresses automatically, and Port Forwarding, allowing specific network traffic to reach designated devices.

In terms of design, the LevelOne WBR-5400 is compact and stylish, perfect for integration into any home or office environment. Its lightweight build makes it easy to install and set up on a shelf or desk.

Overall, the LevelOne WBR-5400 wireless router combines advanced features, secure connections, and user-friendly setup, making it an ideal choice for individuals and small businesses seeking reliable networking solutions. With its combination of performance, security, and convenience, it offers a solid foundation for a seamless online experience.