LevelOne WBR-5400 user manual Equipment Details, Configuration

Page 76

AppendixB 802...1xSetting

Figure 1: Testing Environment (Use Windows 2000 Radius Server)

1 Equipment Details

PC1 OS:

Microsoft Windows XP Professional without Service Pack 1.

PC2 OS:

Microsoft Windows XP Professional with Service Pack 1a.

Authentication Server: Windows 2000 RADIUS server with Service Pack 3 and HotFix Q313664.

Note. Windows 2000 RADIUS server only supports PEAP after upgrade to service pack 3 and HotFix Q313664 (You can get more information from http://support.microsoft.com/default.aspx?scid=kb; en-us;313664)

2 DUT

Configuration:

1.Enable DHCP server.

2.WAN setting: static IP address.

3.LAN IP address: 192.168.123.254/24. 4.Set RADIUS server IP.

Image 76

Contents LevelOne Specification is subject to change without notice CopyrightTrademarks FCC Interference StatementTable of Contents Page Functions and Features High speed for wireless LAN connection SPI Mode SupportedRoaming Ieee 802.11b compatible 11MPacking List Front Panel Panel LayoutFunction Color Status Description Power inlet Port where you will connect your cable or DSL modem orRear Panel Ports Description Ethernet routerProcedure for Hardware Installation Decide where to place your Wireless Broadband RouterSetup LAN connection Setup WAN connectionMake Correct Network Settings of Your Computer PingConfiguringWirelessBroadbandRouter Start-up and Log Status Wizard Press Next Basic Setting Primary Setup WAN Type, Virtual Computers Press ChangeDynamic IP Address Static IP AddressPPP over Ethernet Pptp 1.6 L2TP Virtual Computers Press More Dhcp ServerWireless Setting, and Security Page 802.1X Setting WPA-PSK WPA Page Page Page Page Change Password Forwarding Rules Virtual Server Page Special AP UPnP Setting Miscellaneous ItemsIP Address of DMZ Host Non-standard FTP portSecurity Settings Packet Filter Example Example Filter field Example Example Domain Filter Example URL Blocking Enable URL BlockingPage MAC Address Control MAC Address Control tableIP Address Remote Administrator Host/Port Administrator Time-outSPI Mode Discard Ping from WAN sideDoS Attack Detection VPN PPTP/IPSec Pass-ThroughAdvanced Settings System Time Get Date and Time using PC`s Date and Time Get Date and Time by NTP ProtocolTime Server Time ZoneSystem Log Dynamic DNS New settings will be effective after reboot Snmp Setting Enable SnmpWAN Access IP Address Get CommunityExample Routing Table Configuration on NAT Router Destination Schedule Rule Press Add New RulePage Edit After configure Rule Schedule EnableDelete Page Toolbox System Log Firmware Upgrade Reset to default Backup SettingReboot Miscellaneous Items MAC Address for Wake-on-LAN Domain Name or IP address for Ping TestAppendixA TCP/IPConfigurationforWindows95/98 Install TCP/IP Protocol into Your PCSet TCP/IP Protocol for Working with NAT Router Don’t input any value in the Gateway tab Page Page Configuration Equipment DetailsDUT and Windows 2000 Radius Server Setup Enable Ieee 802.1X access control Page Certificate information on PC1 Authentication success Reset to factory Default Restore directly when the router power on

WBR-5400 specifications

The LevelOne WBR-5400 is a robust wireless router designed to meet the needs of both home and small office environments. With its efficient and reliable performance, the WBR-5400 stands out as a versatile networking solution, delivering seamless connectivity and impressive features.

One of the key characteristics of the WBR-5400 is its compliance with the IEEE 802.11n standard, which allows for a significant boost in wireless coverage and data transfer speeds. The device can deliver wireless speeds of up to 300 Mbps, ensuring smooth online activities ranging from streaming high-definition content to online gaming. By utilizing multiple antennas and advanced MIMO (Multiple Input Multiple Output) technology, the router optimizes wireless signals, minimizing dead zones and allowing for reliable connections throughout various spaces.

The WBR-5400 also supports both wired and wireless connectivity, featuring four 10/100 Mbps Ethernet ports for users who prefer a stable hardwired connection. This flexibility allows businesses and homes to connect various devices simultaneously, including computers, printers, and smart home devices, providing an efficient networking experience.

Security is paramount in modern networking, and the WBR-5400 incorporates robust encryption protocols, such as WPA and WPA2, to protect sensitive data from unauthorized access. The device also includes a built-in firewall, providing an additional layer of security against potential cyber threats.

Furthermore, the WBR-5400 comes with easy setup and management features. The user-friendly interface assists users in configuring the router settings effortlessly, making it accessible even to those with limited technical knowledge. The router offers features like DHCP server, which assigns IP addresses automatically, and Port Forwarding, allowing specific network traffic to reach designated devices.

In terms of design, the LevelOne WBR-5400 is compact and stylish, perfect for integration into any home or office environment. Its lightweight build makes it easy to install and set up on a shelf or desk.

Overall, the LevelOne WBR-5400 wireless router combines advanced features, secure connections, and user-friendly setup, making it an ideal choice for individuals and small businesses seeking reliable networking solutions. With its combination of performance, security, and convenience, it offers a solid foundation for a seamless online experience.