LaCie 9000291 user manual Troubleshooting Topics, All Users

Page 20

TROUBLESHOOTING TOPICS

Note: Interactive troubleshooting, a highly effective way to resolve problems with your product, is available from www.lacie.com/support/. Select your product, then click the “Troubleshooting” tab.

All Users

Problem: My file transfers are too slow.

Q: USB 3.0 connection: Is the drive connected via a USB 3.0 to a USB 2.0 port on your computer or hub?

A:If your drive is connected to a USB 2.0 port or hub, this is normal. A SuperSpeed USB 3.0 device can only operate at USB 3.0 performance levels when it is connected directly to a USB 3.0 port or hub. Otherwise, the USB 3.0 device will operate at the slower USB transfer rates. Consider buying a USB 3.0 PCI Express Card (for desktop computers) or an ExpressCard 34 (for laptops) to allow your computer to achieve full USB 3.0 transfer speeds. Visit www.lacie.com/accessories/ for information.

Q: USB 3.0 connection: Have you installed USB 3.0 drivers on your computer?

A:Check to see that the SuperSpeed USB 3.0 drivers for both your host bus adapter and device have been installed correctly. If in doubt, uninstall the drivers and re-install them.

Q: USB 3.0 connection: Does your computer or operating system support SuperSpeed USB 3.0?

A:Please refer to the product packaging or consult the product support web page at www.lacie.com/support/ to check the minimum system requirements.

Q: Is your computer's internal hard drive limiting transfer speeds?

A:If your computer has a low-performance internal hard drive (typically a notebook or netbook computer), it will limit the transfer speed since the internal drive's transfer speed will be significantly less than that of the LaCie hard drive.

Problem: I'm receiving file transfer error messages and/or Time Machine does not work.

Q: Did you get an "Error -50" message while copying to the storage?

A:When copying files or folders from a computer to a FAT 32 volume, certain characters cannot be copied. These characters include, but are not limited to:

? < > / \ :

Since it does not offer optimal performance, LaCie does not recommend using the FAT 32 file system with your product. See Optional Formatting and Partitioning for help in choosing a file system. Additionally, Time Machine is only compatible with disks formatted in HFS+ or HFS+ (Journaled). Reformat the drive for Time Machine compatibility.

Rugged USB 3.0 Thunderbolt Series User Manual

20

Image 20
Contents Click Here to Access the UP-TO-DATE Online Version Minimum System Requirements BOX ContentIntroduction Views of the Drive Rear ViewCables and Connectors ThunderboltUSB Getting Connected Connect the Interface CableLaunch Lacie Setup Assistant Launch LaCie Setup AssistantMac users Setup Windows New Account MacWindows Mac Existing Account Windows Mac Windows Vista & Windows 7 Users Unmounting Your DriveWindows XP Users MAC Users Optional Formatting and Partitioning About File System FormatsWindows Users Windows File System Formats Use Ntfs ifMac File System Formats Use HFS+ if Formatting InstructionsMac Users Windows Users Order Source Description Location See Troubleshooting Topics belowGetting Help Troubleshooting Topics All UsersProblem The displayed available capacity doesnt seem right Proceed to physical troubleshooting topics above Precautions Health and Safety PrecautionsGeneral USE Precautions LaCie Limited Warranty Policy Warranty InformationWarranty Upgrades Legal Information Exclusions and Limitations Service DOA Customer WarningLegal Information CopyrightsChanges Federal Communication Commission Interference StatementWeee Manufacturers Declaration for CE CertificationTrademarks Canada Compliance Statement