LevelOne FNS-1000 user manual Define Backup Job

Add New Job

From this screen, you can add new backup jobs, which be displayed on the Backup screen.

Define Backup Job Screen

Follow the guidelines below when adding jobs

Define Backup Job

Name	The backup job’s name must be composed of alphanumeric symbols
	not exceeding 15 characters in length.
Backup Type	Select the desired backup type:
	Full: Backup all files
	Incremental: Only backup files as they are change
	Synchronize: Backup all files to start, and then any files on the
	destination that do not exist on the source are deleted.
Direction	Select the desired direction where backing up will occur:
	From this NAS to another device: Data on the NAS is backed
	up to remote device
	From another device to NAS: Data on remote device is backed
	up to the NAS
This NAS	Select the applicable share.
Share	If backing up from the NAS, select the share you wish to back up.
	If backing up to the NAS, select the share where you want the backup-
	up data to be stored
Sub Folder	When the sub-folder field appears, enter the location of the sub-folder
	where the share will be stored.
Other Device	Enter the details of the remote device where data will be backed up or
	stored
Name	The name of other device, as seen on the network.

Page 35